Adjustment and subsequent validation of energy-dispersive X-ray fluorescence (ED-XRF) method for cement based binders with addition of mineral raw materials (fly ash, zeolite and bentonite) was conducted. Eighteen chemical elements present in the material composition were analyzed: ten major elements (Si, Al, Fe, Ca, Mg, S, Na, K, Ti, P) and eight trace elements (Cr, Zn, Cu, As, Ni, Pb, Sr, Mn). Thirty-five samples of either certified reference materials or reference materials of cement, fly ash and clay were utilized during adjustment and optimization of the investigated ED-XRF procedure. The method was consecutively validated in terms of selectivity, precision, working range, linearity, accuracy, robustness, limits of detection and quantification. Thirty-two samples in total, i.e. three certified reference materials and twenty-nine reference materials, were simultaneously analyzed by ED-XRF and inductively coupled plasma optical emission spectrometry (ICP-OES). Comparison of the outp...uts of monitored methods showed infinitesimally small differences, as correlation coefficients were extremely good (approximate to 1), which highlighted ED-XRF as highly satiable alternative for ICP-OES for the chemical analysis of cement binders.
TY - JOUR
AU - Mijatović, Nevenka
AU - Terzić, Anja
AU - Pezo, Lato
AU - Miličić, Ljiljana
AU - Živojinović, Dragana
PY - 2019
UR - http://rims.institutims.rs/handle/123456789/363
AB - Adjustment and subsequent validation of energy-dispersive X-ray fluorescence (ED-XRF) method for cement based binders with addition of mineral raw materials (fly ash, zeolite and bentonite) was conducted. Eighteen chemical elements present in the material composition were analyzed: ten major elements (Si, Al, Fe, Ca, Mg, S, Na, K, Ti, P) and eight trace elements (Cr, Zn, Cu, As, Ni, Pb, Sr, Mn). Thirty-five samples of either certified reference materials or reference materials of cement, fly ash and clay were utilized during adjustment and optimization of the investigated ED-XRF procedure. The method was consecutively validated in terms of selectivity, precision, working range, linearity, accuracy, robustness, limits of detection and quantification. Thirty-two samples in total, i.e. three certified reference materials and twenty-nine reference materials, were simultaneously analyzed by ED-XRF and inductively coupled plasma optical emission spectrometry (ICP-OES). Comparison of the outputs of monitored methods showed infinitesimally small differences, as correlation coefficients were extremely good (approximate to 1), which highlighted ED-XRF as highly satiable alternative for ICP-OES for the chemical analysis of cement binders.
PB - Pergamon-Elsevier Science Ltd, Oxford
T2 - Spectrochimica Acta Part B-Atomic Spectroscopy
T1 - Validation of energy-dispersive X-ray fluorescence procedure for determination of major and trace elements present in the cement based composites
VL - 162
DO - 10.1016/j.sab.2019.105729
ER -
@article{
author = "Mijatović, Nevenka and Terzić, Anja and Pezo, Lato and Miličić, Ljiljana and Živojinović, Dragana",
year = "2019",
abstract = "Adjustment and subsequent validation of energy-dispersive X-ray fluorescence (ED-XRF) method for cement based binders with addition of mineral raw materials (fly ash, zeolite and bentonite) was conducted. Eighteen chemical elements present in the material composition were analyzed: ten major elements (Si, Al, Fe, Ca, Mg, S, Na, K, Ti, P) and eight trace elements (Cr, Zn, Cu, As, Ni, Pb, Sr, Mn). Thirty-five samples of either certified reference materials or reference materials of cement, fly ash and clay were utilized during adjustment and optimization of the investigated ED-XRF procedure. The method was consecutively validated in terms of selectivity, precision, working range, linearity, accuracy, robustness, limits of detection and quantification. Thirty-two samples in total, i.e. three certified reference materials and twenty-nine reference materials, were simultaneously analyzed by ED-XRF and inductively coupled plasma optical emission spectrometry (ICP-OES). Comparison of the outputs of monitored methods showed infinitesimally small differences, as correlation coefficients were extremely good (approximate to 1), which highlighted ED-XRF as highly satiable alternative for ICP-OES for the chemical analysis of cement binders.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Spectrochimica Acta Part B-Atomic Spectroscopy",
title = "Validation of energy-dispersive X-ray fluorescence procedure for determination of major and trace elements present in the cement based composites",
volume = "162",
doi = "10.1016/j.sab.2019.105729"
}
Mijatović, N., Terzić, A., Pezo, L., Miličić, L.,& Živojinović, D.. (2019). Validation of energy-dispersive X-ray fluorescence procedure for determination of major and trace elements present in the cement based composites. in Spectrochimica Acta Part B-Atomic Spectroscopy
Pergamon-Elsevier Science Ltd, Oxford., 162.
https://doi.org/10.1016/j.sab.2019.105729
Mijatović N, Terzić A, Pezo L, Miličić L, Živojinović D. Validation of energy-dispersive X-ray fluorescence procedure for determination of major and trace elements present in the cement based composites. in Spectrochimica Acta Part B-Atomic Spectroscopy. 2019;162.
doi:10.1016/j.sab.2019.105729 .
Mijatović, Nevenka, Terzić, Anja, Pezo, Lato, Miličić, Ljiljana, Živojinović, Dragana, "Validation of energy-dispersive X-ray fluorescence procedure for determination of major and trace elements present in the cement based composites" in Spectrochimica Acta Part B-Atomic Spectroscopy, 162 (2019),
https://doi.org/10.1016/j.sab.2019.105729 . .
