RIMS - Repository of Institute for Material Testing
Institute for Material Testing
    • English
    • Српски
    • Српски (Serbia)
  • English 
    • English
    • Serbian (Cyrillic)
    • Serbian (Latin)
  • Login
View Item 
  •   RIMS
  • Institut za ispitivanje materijala
  • Radovi istraživača / Researchers' publications
  • View Item
  •   RIMS
  • Institut za ispitivanje materijala
  • Radovi istraživača / Researchers' publications
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Cavitation Properties of Rendering Mortars with Micro Silica Addition

Thumbnail
2021
396.pdf (1.011Mb)
Authors
Terzić, Anja
Dojčinović, Marina
Miličić, Ljiljana
Stojanović, Jovica
Radojević, Zagorka
Article (Published version)
Metadata
Show full item record
Abstract
Micro-silica is a highly efficient mineral additive whose role is reflected in improvements of microstructure packing, strength and durability of non-shaped composite building materials such as concrete and mortar. A comparative study of performances of rendering mortars with different quantities of micro silica was conducted. The experimental program included production of reference mortar based on Portland cement and quartz sand (CM) and three mortars with 5, 10, and 15 % addition of micro silica (SCM-5, SCM-10, and SCM-15). The effect that micro silica addition has on the thermal behavior and mechanical properties of mortars was discussed. Hydration mechanisms and thermally induced reactions were studied at temperatures ranging from ambient to 1100 degrees C by differential thermal analysis. The results were supported by X-ray diffraction analysis. The cementing efficiency of micro silica was assessed by cavitation erosion test. The changes in the morphology of mortar samples prior ...and upon cavitation testing were monitored by means of the scanning electron microscope imagining. It was found that 5 % of superfine micro silica (SCM-5 mortar) has positive effects on mechanical strengths (15 % increase in compressive strength) due to microstructure densification arising from the successive filling of voids by the micro silica. Addition of micro silica also improved the cavitation erosion resistance in comparison with reference cement mortar (SCM-5 showed cavitation velocity as low as 0.09 mg/min). This qualifies mortars with micro silica addition as building materials which can be safely employed in potential hydro-demolition environment.

Keywords:
Thermal analysis / Micro-filler / Mechanical properties / Construction materials / Composites
Source:
Science of Sintering, 2021, 53, 4, 445-459
Publisher:
  • Međunarodni Institut za nauku o sinterovanju, Beograd
Funding / projects:
  • Ministry of Education, Science and Technological Development, Republic of Serbia, Grant no. 200012 (Istitute of Material Testing of Serbia - IMS, Belgrade) (RS-200012)

DOI: 10.2298/SOS2104445T

ISSN: 0350-820X

WoS: 000756037700003

Scopus: 2-s2.0-85124453259
[ Google Scholar ]
URI
http://rims.institutims.rs/handle/123456789/399
Collections
  • Radovi istraživača / Researchers' publications
Institution/Community
Institut za ispitivanje materijala
TY  - JOUR
AU  - Terzić, Anja
AU  - Dojčinović, Marina
AU  - Miličić, Ljiljana
AU  - Stojanović, Jovica
AU  - Radojević, Zagorka
PY  - 2021
UR  - http://rims.institutims.rs/handle/123456789/399
AB  - Micro-silica is a highly efficient mineral additive whose role is reflected in improvements of microstructure packing, strength and durability of non-shaped composite building materials such as concrete and mortar. A comparative study of performances of rendering mortars with different quantities of micro silica was conducted. The experimental program included production of reference mortar based on Portland cement and quartz sand (CM) and three mortars with 5, 10, and 15 % addition of micro silica (SCM-5, SCM-10, and SCM-15). The effect that micro silica addition has on the thermal behavior and mechanical properties of mortars was discussed. Hydration mechanisms and thermally induced reactions were studied at temperatures ranging from ambient to 1100 degrees C by differential thermal analysis. The results were supported by X-ray diffraction analysis. The cementing efficiency of micro silica was assessed by cavitation erosion test. The changes in the morphology of mortar samples prior and upon cavitation testing were monitored by means of the scanning electron microscope imagining. It was found that 5 % of superfine micro silica (SCM-5 mortar) has positive effects on mechanical strengths (15 % increase in compressive strength) due to microstructure densification arising from the successive filling of voids by the micro silica. Addition of micro silica also improved the cavitation erosion resistance in comparison with reference cement mortar (SCM-5 showed cavitation velocity as low as 0.09 mg/min). This qualifies mortars with micro silica addition as building materials which can be safely employed in potential hydro-demolition environment.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Cavitation Properties of Rendering Mortars with Micro Silica Addition
EP  - 459
IS  - 4
SP  - 445
VL  - 53
DO  - 10.2298/SOS2104445T
UR  - conv_514
ER  - 
@article{
author = "Terzić, Anja and Dojčinović, Marina and Miličić, Ljiljana and Stojanović, Jovica and Radojević, Zagorka",
year = "2021",
abstract = "Micro-silica is a highly efficient mineral additive whose role is reflected in improvements of microstructure packing, strength and durability of non-shaped composite building materials such as concrete and mortar. A comparative study of performances of rendering mortars with different quantities of micro silica was conducted. The experimental program included production of reference mortar based on Portland cement and quartz sand (CM) and three mortars with 5, 10, and 15 % addition of micro silica (SCM-5, SCM-10, and SCM-15). The effect that micro silica addition has on the thermal behavior and mechanical properties of mortars was discussed. Hydration mechanisms and thermally induced reactions were studied at temperatures ranging from ambient to 1100 degrees C by differential thermal analysis. The results were supported by X-ray diffraction analysis. The cementing efficiency of micro silica was assessed by cavitation erosion test. The changes in the morphology of mortar samples prior and upon cavitation testing were monitored by means of the scanning electron microscope imagining. It was found that 5 % of superfine micro silica (SCM-5 mortar) has positive effects on mechanical strengths (15 % increase in compressive strength) due to microstructure densification arising from the successive filling of voids by the micro silica. Addition of micro silica also improved the cavitation erosion resistance in comparison with reference cement mortar (SCM-5 showed cavitation velocity as low as 0.09 mg/min). This qualifies mortars with micro silica addition as building materials which can be safely employed in potential hydro-demolition environment.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Cavitation Properties of Rendering Mortars with Micro Silica Addition",
pages = "459-445",
number = "4",
volume = "53",
doi = "10.2298/SOS2104445T",
url = "conv_514"
}
Terzić, A., Dojčinović, M., Miličić, L., Stojanović, J.,& Radojević, Z.. (2021). Cavitation Properties of Rendering Mortars with Micro Silica Addition. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 53(4), 445-459.
https://doi.org/10.2298/SOS2104445T
conv_514
Terzić A, Dojčinović M, Miličić L, Stojanović J, Radojević Z. Cavitation Properties of Rendering Mortars with Micro Silica Addition. in Science of Sintering. 2021;53(4):445-459.
doi:10.2298/SOS2104445T
conv_514 .
Terzić, Anja, Dojčinović, Marina, Miličić, Ljiljana, Stojanović, Jovica, Radojević, Zagorka, "Cavitation Properties of Rendering Mortars with Micro Silica Addition" in Science of Sintering, 53, no. 4 (2021):445-459,
https://doi.org/10.2298/SOS2104445T .,
conv_514 .

DSpace software copyright © 2002-2015  DuraSpace
About RIMS | Send Feedback

OpenAIRERCUB
 

 

All of DSpaceCommunitiesAuthorsTitlesSubjectsThis institutionAuthorsTitlesSubjects

Statistics

View Usage Statistics

DSpace software copyright © 2002-2015  DuraSpace
About RIMS | Send Feedback

OpenAIRERCUB