SolidWorks used for the process of optimization of supporting structure of a pressure vessel
Konferencijski prilog (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
According to the new regulations of the European Community (Directive 97/23/EC, design and manufacture of the pressure
vessels (PV) shall be in accordance with legal and technical regulations stating the application of harmonized standards to be optional for a
manufacturer of the equipment. Increased responsibility of the manufacturers gives more freedom in selection of the methods, design,
calculation and optimization in order to provide safety. In this paper, using a liquid CO2-containing vessel as an example, a survey of the
process of optimization of a supporting structure has been presented. For parametric design, construction and calculation the SolidWorks
programme has been used, taking into consideration the regulations and standards in effect, and in accordance with new and general
approach to pressure equipment (Pressure Equipment Directive – PED) relating to structural integrity, i.e. fundamental requirements in
terms of safety, calculation, design and testing of stre...ngth.
Ključne reči:
SOLIDWORKS / DIRECTIVE / PRESSURE VESSEL / OPTIMIZATION / METHOD OF FINITE ELEMENTSIzvor:
VIII INTERNATIONAL CONGRESS MACHINЕS, TECHNOLОGIES, MATERIALS, Varna, Bulgaria, 2011, 3, 190-193Institucija/grupa
Institut za ispitivanje materijalaTY - CONF AU - Aleksić, Vujadin AU - Jaković, Dragan AU - Kovačević, Zorica PY - 2011 UR - http://rims.institutims.rs/handle/123456789/698 AB - According to the new regulations of the European Community (Directive 97/23/EC, design and manufacture of the pressure vessels (PV) shall be in accordance with legal and technical regulations stating the application of harmonized standards to be optional for a manufacturer of the equipment. Increased responsibility of the manufacturers gives more freedom in selection of the methods, design, calculation and optimization in order to provide safety. In this paper, using a liquid CO2-containing vessel as an example, a survey of the process of optimization of a supporting structure has been presented. For parametric design, construction and calculation the SolidWorks programme has been used, taking into consideration the regulations and standards in effect, and in accordance with new and general approach to pressure equipment (Pressure Equipment Directive – PED) relating to structural integrity, i.e. fundamental requirements in terms of safety, calculation, design and testing of strength. C3 - VIII INTERNATIONAL CONGRESS MACHINЕS, TECHNOLОGIES, MATERIALS, Varna, Bulgaria T1 - SolidWorks used for the process of optimization of supporting structure of a pressure vessel EP - 193 SP - 190 VL - 3 UR - https://hdl.handle.net/21.15107/rcub_rims_698 ER -
@conference{ author = "Aleksić, Vujadin and Jaković, Dragan and Kovačević, Zorica", year = "2011", abstract = "According to the new regulations of the European Community (Directive 97/23/EC, design and manufacture of the pressure vessels (PV) shall be in accordance with legal and technical regulations stating the application of harmonized standards to be optional for a manufacturer of the equipment. Increased responsibility of the manufacturers gives more freedom in selection of the methods, design, calculation and optimization in order to provide safety. In this paper, using a liquid CO2-containing vessel as an example, a survey of the process of optimization of a supporting structure has been presented. For parametric design, construction and calculation the SolidWorks programme has been used, taking into consideration the regulations and standards in effect, and in accordance with new and general approach to pressure equipment (Pressure Equipment Directive – PED) relating to structural integrity, i.e. fundamental requirements in terms of safety, calculation, design and testing of strength.", journal = "VIII INTERNATIONAL CONGRESS MACHINЕS, TECHNOLОGIES, MATERIALS, Varna, Bulgaria", title = "SolidWorks used for the process of optimization of supporting structure of a pressure vessel", pages = "193-190", volume = "3", url = "https://hdl.handle.net/21.15107/rcub_rims_698" }
Aleksić, V., Jaković, D.,& Kovačević, Z.. (2011). SolidWorks used for the process of optimization of supporting structure of a pressure vessel. in VIII INTERNATIONAL CONGRESS MACHINЕS, TECHNOLОGIES, MATERIALS, Varna, Bulgaria, 3, 190-193. https://hdl.handle.net/21.15107/rcub_rims_698
Aleksić V, Jaković D, Kovačević Z. SolidWorks used for the process of optimization of supporting structure of a pressure vessel. in VIII INTERNATIONAL CONGRESS MACHINЕS, TECHNOLОGIES, MATERIALS, Varna, Bulgaria. 2011;3:190-193. https://hdl.handle.net/21.15107/rcub_rims_698 .
Aleksić, Vujadin, Jaković, Dragan, Kovačević, Zorica, "SolidWorks used for the process of optimization of supporting structure of a pressure vessel" in VIII INTERNATIONAL CONGRESS MACHINЕS, TECHNOLОGIES, MATERIALS, Varna, Bulgaria, 3 (2011):190-193, https://hdl.handle.net/21.15107/rcub_rims_698 .