Parameter programs for 3D modeling in the function of nondestructive testing and determination of the lifetime of pressure vessels
Konferencijski prilog (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Preparation for non-destructive testing (NDT), preparation of test reports, as well as control
calculation of a pressure vessel (PV) using the finite element method (FEM), with or without
identified irregularities, requires the use of commercial programs for parametric modeling,
which allow the rapid creation of three-dimensional (3D) model of the test object. 3D modeling
programs enable the determination of one or more rappers in order to orient the test object,
accurately define the established irregularity or error after NDT, as well as the most critical
part of the PV construction after FEM calculation with the possibility of optimization.
Programs for 3D modeling also enable modeling of determined irregularities after performed
tests that occurred during the construction, calculation, production or exploitation of the PV
construction itself. Irregularities are reflected in the form of improperly performed welded
joints, cracks, corrosion, erosion or cavitation of materia...ls, and are used for the preparation of
test reports and control calculations of the PV structure with and/or without established
irregularities and errors, with the aim of making the correct decision on the continuation of
exploitation construction of PV or about its degree of rehabilitation
Ključne reči:
NDT / PV / FEA / parametric modeling / 3D modelIzvor:
VIII International Congress “Engineering, Environment and Materials in Process Industry“, 2023, 411-418Izdavač:
- UNIVERSITY OF EAST SARAJEVO FACULTY OF TECHNOLOGY
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200012 (Institut za ispitivanje materijala Srbije - IMS, Beograd) (RS-MESTD-inst-2020-200012)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200287 (Inovacioni centar Tehnološko-metalurškog fakulteta u Beogradu doo) (RS-MESTD-inst-2020-200287)
Institucija/grupa
Institut za ispitivanje materijalaTY - CONF AU - Aleksić, Vujadin AU - Bulatović, Srđan AU - Zečević, Bojana AU - Maksimović, Ana AU - Milović, Ljubica PY - 2023 UR - http://rims.institutims.rs/handle/123456789/767 AB - Preparation for non-destructive testing (NDT), preparation of test reports, as well as control calculation of a pressure vessel (PV) using the finite element method (FEM), with or without identified irregularities, requires the use of commercial programs for parametric modeling, which allow the rapid creation of three-dimensional (3D) model of the test object. 3D modeling programs enable the determination of one or more rappers in order to orient the test object, accurately define the established irregularity or error after NDT, as well as the most critical part of the PV construction after FEM calculation with the possibility of optimization. Programs for 3D modeling also enable modeling of determined irregularities after performed tests that occurred during the construction, calculation, production or exploitation of the PV construction itself. Irregularities are reflected in the form of improperly performed welded joints, cracks, corrosion, erosion or cavitation of materials, and are used for the preparation of test reports and control calculations of the PV structure with and/or without established irregularities and errors, with the aim of making the correct decision on the continuation of exploitation construction of PV or about its degree of rehabilitation PB - UNIVERSITY OF EAST SARAJEVO FACULTY OF TECHNOLOGY C3 - VIII International Congress “Engineering, Environment and Materials in Process Industry“ T1 - Parameter programs for 3D modeling in the function of nondestructive testing and determination of the lifetime of pressure vessels EP - 418 SP - 411 UR - https://hdl.handle.net/21.15107/rcub_rims_767 ER -
@conference{ author = "Aleksić, Vujadin and Bulatović, Srđan and Zečević, Bojana and Maksimović, Ana and Milović, Ljubica", year = "2023", abstract = "Preparation for non-destructive testing (NDT), preparation of test reports, as well as control calculation of a pressure vessel (PV) using the finite element method (FEM), with or without identified irregularities, requires the use of commercial programs for parametric modeling, which allow the rapid creation of three-dimensional (3D) model of the test object. 3D modeling programs enable the determination of one or more rappers in order to orient the test object, accurately define the established irregularity or error after NDT, as well as the most critical part of the PV construction after FEM calculation with the possibility of optimization. Programs for 3D modeling also enable modeling of determined irregularities after performed tests that occurred during the construction, calculation, production or exploitation of the PV construction itself. Irregularities are reflected in the form of improperly performed welded joints, cracks, corrosion, erosion or cavitation of materials, and are used for the preparation of test reports and control calculations of the PV structure with and/or without established irregularities and errors, with the aim of making the correct decision on the continuation of exploitation construction of PV or about its degree of rehabilitation", publisher = "UNIVERSITY OF EAST SARAJEVO FACULTY OF TECHNOLOGY", journal = "VIII International Congress “Engineering, Environment and Materials in Process Industry“", title = "Parameter programs for 3D modeling in the function of nondestructive testing and determination of the lifetime of pressure vessels", pages = "418-411", url = "https://hdl.handle.net/21.15107/rcub_rims_767" }
Aleksić, V., Bulatović, S., Zečević, B., Maksimović, A.,& Milović, L.. (2023). Parameter programs for 3D modeling in the function of nondestructive testing and determination of the lifetime of pressure vessels. in VIII International Congress “Engineering, Environment and Materials in Process Industry“ UNIVERSITY OF EAST SARAJEVO FACULTY OF TECHNOLOGY., 411-418. https://hdl.handle.net/21.15107/rcub_rims_767
Aleksić V, Bulatović S, Zečević B, Maksimović A, Milović L. Parameter programs for 3D modeling in the function of nondestructive testing and determination of the lifetime of pressure vessels. in VIII International Congress “Engineering, Environment and Materials in Process Industry“. 2023;:411-418. https://hdl.handle.net/21.15107/rcub_rims_767 .
Aleksić, Vujadin, Bulatović, Srđan, Zečević, Bojana, Maksimović, Ana, Milović, Ljubica, "Parameter programs for 3D modeling in the function of nondestructive testing and determination of the lifetime of pressure vessels" in VIII International Congress “Engineering, Environment and Materials in Process Industry“ (2023):411-418, https://hdl.handle.net/21.15107/rcub_rims_767 .