Претраживање
Приказ резултата 41-50 од 63
Durability of concrete with different types of cement
(Procema SA, 2016)
Adequate measures must be taken during the determination of the concrete composition for ensuring the durability of concrete exposed to an aggressive environment. The influence of the cement type on the freeze/thaw resistance ...
Transport and storage of heavy metals in the Sava River Basin in Serbia
(Srpsko hemijsko društvo, Beograd, 2014)
Selected heavy metals (Cu, Zn, Pb and Cd) in the water and sediment of the Sava River in Serbia were investigated from three locations in the vicinity of industrial and urban settlements (Sabac, Obrenovac and Belgrade) ...
Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2015)
This study presents the results of an investigation of high-temperature materials refractory coatings based on different refractory fillers including talc, cordierite, zircon and mullite applied in the lost-foam casting ...
Structural Integrity Assessment of Welded Pressure Vessel Produced of HSLA Steel
(Journal Iron Steel Research Editorial Board, Beijing, 2011)
Welded joint is a critical region of a welded structure. The operational safety of welded pressure equipment mostly depends on the behaviour of loaded weldments. Safety of welded structure is dependent on the properties ...
Gamma Radiation Absorption Characteristics of Concrete with Components of Different Type Materials
(Polish Acad Sciences Inst Physics, Warsaw, 2010)
Nuclear facilities as nuclear power stations, nuclear research reactors, particle accelerators and linear accelerator in medical institution using concrete in building construction. The different type materials of the ...
Synthesizing a new type of mullite lining
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2013)
Various possibilities for developing new mullite-based refractory linings that can be applied in a casting process were investigated and are presented in this paper. An optimization of the refractory-lining composition ...
The influence of silica fume and curing regime on some properties of concrete
(Revista Romana de Materiale/ Romanian Journal of Materials, 2014)
The investigation of posibilities of concrete structure modification by silica fume to improve concrete properties was presented in this report. Percentage of silica fume in regard to cement varied between 0% and 20%. ...
Life extension of gears flank surfaces regenerated by hard facing
(Editura Stiintifica Fmr, Bucharest, 2013)
This paper contains the results of experimental analysis of fatigue endurance of used steel teeth regenerated by hard facing. The cylindrical spur gears were tested and compared with the newly made ones, oiler being ...
Buckling resistance of stainless steel angle column
(Union of Croatian Civil Engineers and Technicians, 2019)
A numerical study of compressive capacities of stainless steel angle columns is presented in the paper in order to assess the design procedures presented in Eurocode 3. The study focuses on pin-ended hot-rolled equal angle ...
Investigation of high temperature behavior and sintering mechanism of fly ash based concretes
(Procema SA, 2014)
Four types of refractory concretes were studied at various temperatures ranging from ambient to adopted maximal 1400 degrees C. The concretes had same matrix composition: K concretes were based on corundum aggregate; B ...