Претраживање
Приказ резултата 101-110 од 140
Analysis of the steam line damages
(Mašinski Fakultet Banja Luka, Republika Srpska, 2015)
The methodological approach to the analysis of damage to determine the
cause of failure and to repair the damage has been shown using the example of leakage
and damage of a steam line for live-steam in thermal power ...
Determination of polynomial depending between hardness and cooling time t8/5 of steel NIONICRAL 70 heat affected zone
(18th International Conference on New Trends in Fatigue and Fracture NT2F18, 2018)
Because of the high heating and cooling velocity values, welding procedure is an unstable process. During
welding, changes in microstructure are occurring under overheating and/or cooling conditions. In comparing to ...
Behaviour of 9% Cr steel and simulated HAZ at 600°C
(FRACT3, Chlef, Algeria, 2016)
Analiza opravdanosti modeliranja sučeono zavarenih spojeva kod proračuna posuda pod pritiskom
(Tehnološki fakultet, Zvornik, Republika Srpska, BiH, 2017)
U radu je posle proračuna metodom konačnih elemenata (MKE) analizirana raspodela napona
na modelu dela oplate rezervoara pod pritiskom bez zavarenih spojeva (ZS), sa obimnim ZS,
podužnim ZS i ukrsnim mestom ZS. Takođe, ...
Methodology for determining the region of stabilization of low-cycle fatigue
(Fakultet strojarstva i brodarsta, Univerzitet u Zagrebu, Hrvatska, 2016)
In present paper, the behaviour of high-strength low-alloyed (HSLA) steel under conditions
of low-cycle fatigue (LCF) has been experimentally tested and analyzed. Based on the experimental
results obtained in the programme ...
Establishment and quantification of corrosion-induced damages of protective steel pipes in oil industry
(Velenje Coal Mine, Slovenija, 2011)
Concrete shrinkage mechanism and examples of concrete with different recycled aggregates
(University of Structural Engineering and Architecture (VSU) "Luben Karavelov" Sofia, Bulgaria, 2016)
Concrete shrinkage is reduction of its volume which is caused by hydration of cement and loss of moisture, independently of the external load. Aggregate can be considered inert in terms of volume changes, so concrete ...
SolidWorks used for the process of optimization of supporting structure of a pressure vessel
(VIII INTERNATIONAL CONGRESS MACHINЕS, TECHNOLОGIES, MATERIALS, Varna, Bulgaria, 2011)
According to the new regulations of the European Community (Directive 97/23/EC, design and manufacture of the pressure
vessels (PV) shall be in accordance with legal and technical regulations stating the application of ...
Applied Element Method (AEM) in Dynamic and Seismic Analysis
(Savez građevinskih inženjera Srbije, 2014)
Applied Element Method (AEM), as the relatively new (15-20 years old) and little known numerical method is presented in the paper, first generally, and then with particular reference to dynamic and seismic analysis. Using ...
Metodologija određivanja pokazatelja ponašanja HSLA čelika pri delovanju niskocikličnog zamora
(Tehnološki fakultet, Zvornik, 2017)
U radu je analizirano eksperimentalno istraživanje ponašanja niskolegiranog čelika povišene
čvrstoće (HSLA) u uslovima niskocikličnog zamora (LCF), sa kontrolisanom i potpuno
reverzibilnom deformacijom (/2 = const, R ...