Претраживање
Приказ резултата 41-50 од 198
Analysis of the nominal load effects on gear load capacity using the finite-element method
(Sage Publications Ltd, London, 2010)
This research investigates the effects of the nominal load value on load distribution of simultaneously meshing gear teeth pairs, and on the involute gear load capacity. The research results presented in this article confirm ...
Assessment of the effect of pitting corrosion on fatigue crack initiation in hydro turbine shaft
(Trans Tech Publications Ltd, 2013)
Energy efficiency is a key issue worldwide, and not confined solely to the realm of engineers. Past failures of mechanical power system components must be examined carefully in order to minimise future occurrences and ...
Application of Organic and Inorganic Wastes in Clay Brick Production: A Chemometric Approach
(Wiley Blackwell, 2016)
The goal of this study was the research on the usage capability of various industrial wastes in clay bricks. Changes in product's behavior were studied in terms of relative differences in ceramic-technological parameters ...
The study of thermal behavior of montmorillonite and hydromica brick clays in predicting tunnel kiln firing curve
(Elsevier Sci Ltd, Oxford, 2017)
The aim of this study was to test montmorillonite and hydromica type of brick clays by using simultaneous thermal analysis and dilatometry in an assessment of the suitability of brick clays to produce building elements. ...
Network-level pavement life-cycle assessment tool
(CRC Press/Balkema, 2015)
In addition to their attempt to keep overall maintenance costs low while keeping their road networks in the appropriate condition, road agencies are facing even more demanding challenges as they incorporate effects on ...
Analysis of Moisture Transfer During the Drying of Clay Tiles with Particular Reference to an Estimation of the Time-Dependent Effective Diffusivity
(Taylor & Francis Inc, Philadelphia, 2014)
The description of the drying process was reduced to the establishment of a series of theoretical and empirical drying models. The complex processes of simultaneous moisture and heat transfer, which are often nonstationary, ...
Novel Utilization of Fly Ash for High-Temperature Mortars: Phase Composition, Microstructure and Performances Correlation
(Wiley, Hoboken, 2015)
In this study, the feasibility of using fly ash to manufacture high-temperature mortars was investigated. The investigation was set to define preliminary characteristics of new types of mortars based on ordinary and/or ...
The effects of chemical composition and firing temperature in heavy clay brick production - Chemometric approach
(Expert Fachmedien GmbH, 2014)
Factors influencing final clay brick properties are numerous, since the raw materials are highly heterogeneous. The chemometric approach is rarely used in analysis in this field, although it could significantly improve ...
Mathematical approach to application of industrial wastes in clay brick production - Part I: Testing and analysis
(Elsevier Sci Ltd, Oxford, 2015)
The objective of this study was to investigate utilization potential of organic and inorganic industrial wastes in clay bricks. Mineral composition of starting heavy clay sample is tested using an X-ray diffractometer. ...
Mathematical approach to application of industrial wastes in clay brick production-Part II: Optimization
(Elsevier Sci Ltd, Oxford, 2015)
The effects of organic and inorganic waste sludges, coal dust, fly and landfill ashes, soybean crust, sawdust, sunflower flakes and their ash addition to representative heavy clay were investigated. Changes introduced to ...