Претраживање
Приказ резултата 1-10 од 136
Comparative kinetic study of mechanical activation process of mica and talc for industrial application
(Elsevier Sci Ltd, Oxford, 2014)
Mica and talc have wide areas of application as a raw material in a number of industrial branches. Mechanically activated mica has specific applications such as: capacitors, insulators, and pearlescent pigments. Talc is ...
ANN model of brick properties using LPNORM calculation of minerals content
(Elsevier Sci Ltd, Oxford, 2014)
Mineralogical composition of heavy clays is one of the most important properties when stadying raw materials in brick industry. Within this study, quantitative determination of minerals using LPNORM calculation was performed, ...
Linings based chromite for application in foundry
(ModTech Publishing House, 2012)
In this work, a possibility to develop new chromite-based refractory linings for casting applications has been examined. Lining composition optimization with the controlled reologic properties was achieved by applying ...
Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions
(Elsevier Sci Ltd, Oxford, 2017)
The effects of thermally (MK) or mechanically activated kaolin (AK) on the compressive strength of mortars and microstructure of pastes were investigated. Mortar mixtures, in which 10%, 20% and 30% of ordinary Portland ...
Mechanically activated coal ash as refractory bauxite shotcrete microfiller: Thermal interactions mechanism investigation
(Elsevier Sci Ltd, Oxford, 2014)
A growing demand for refractory castables with advanced properties has given rise to a continuous technological evolution and highlighted the necessity for secondary raw materials reapplication even in refractory industry. ...
The influence of nano-silica and barite aggregate on properties of ultra high performance concrete
(Elsevier Sci Ltd, Oxford, 2016)
The development of building materials with improved characteristics and their application for increasing structure durability and sustainability is one of the goals in construction sector. The main objective of this paper ...
Microstructure analysis and crack detection in turbine blades after prolonged exposure in plant
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
Turbine blades are one of the most important machine parts in every power generator. Corrosion and/or erosion attack on blades are also available in moisture atmosphere, because the wet water vapour is an usual working ...
Methodological approach to recovery of the cracks on the turbine-shaft at hydroelectric power plant djerdap II
(Springer Netherlands, 2013)
In present paper, the methodological approach to analysis of the causes of failures and recovery of the damages has been presented using the example of the damage of the turbine-shafts construction. This approach can be ...
Review of results of interlaboratory comparisons of national accredited laboratorys in the free field noise level measurements
(IEEE, NEW YORK, 2015)
Interlaboratory comparisons in the field of enviromental noise level measurements were organized by IMS Institute in Belgrade in August this year as a part of the standard noise monitoring according to of the method given ...
Određivanje koeficijenta prenosa toplote prilikom sušenja opekarskih proizvoda / Determination of the heat transfer coefficient during drying of heavy clay products
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2011)
Određivanje koeficijenata prenosa toplote prilikom sušenja opekarskih proizvoda izvršena su na uzorcima pločica od gline sa lokaliteta 'Banatski Karlovac' dimenzija (120 x 50 x 14 mm). Ispitivanja su sprovedena u laboratorijskoj ...