Претраживање
Приказ резултата 501-510 од 861
The effects of chemical composition and firing temperature in heavy clay brick production - Chemometric approach
(Expert Fachmedien GmbH, 2014)
Factors influencing final clay brick properties are numerous, since the raw materials are highly heterogeneous. The chemometric approach is rarely used in analysis in this field, although it could significantly improve ...
Influence of Temperature on Impact Toughness of HSLA Steels
(Structural Integrity and Life, Special Issue, 2023)
The aim of this paper is to present the influence of differ-ent temperatures on the impact toughness of welded joint of high strength low-alloy steel. The results of impact tests for all three constituents of the manual ...
Heavyweight Ultra-High-Performance Concrete with Micro-Reinforcement
(Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, Belgrade, Serbia, 2023)
The impacts of nano-silica addition, steel micro-reinforcement, and aggregate type on the mechanical properties and durability of ultra-high-performance concrete (UHPC) were studied. As aggregates, quartz and barite were ...
Possibility of Using Other Additives as Replacement for Air Entraining Admixture in Concrete
(Serbian Ceramic Society Conference - Advanced Ceramics and Applications X: New Frontiers in Multifunctional Material Science and Processing, Book of Abstracts, 2022)
Concrete in which the air entraining admixture was used can exhibit behavior which alternate from the ‘standard’ concrete behavior when employed in the structural design. The origin of this problem can be found in the ...
Impact of fine aggregate particle size and morphology on the early strengths of SCC
(International Congress Proceedings / Association of Structural Engineers of Serbia, 16. Congress, Aranđelovac, Serbia, 2022)
A comparative study of performances of self compacting concrete (SCC) with fly ash and limestone filler was conducted. The experimental program included the production of reference SCC designed with Portland cement, river ...
Influence of different types of fibers on flexural tensile strength
(Proceedings of the ASES International Symposium, Aranđelovac, Serbia, 2022)
The paper presents the influence of the application of different types of fibers in
concrete beams on the flexural tensile strength. All concrete beams were made of
the same component materials and composition, except ...
Ispitivanje mikrostrukture i svojstava vatrostalnog betona
(Simpozijum o istraživanjima i primeni savremenih dostignuća u našem građevinarstvu u oblasti materijala i konstrukcija, Zbornik radova, XXIV Kongres, Divčibare, 2008)
Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT)
(Structural Integrity and Life, Special Issue, 2023)
The paper shows the comparative analysis of behavior and bearing capacity of piles examined using the Dynamic Load Test (DLT) according to Static Load Test (SLT) results. The pile testing methodology is based on the existing ...
Dispersive Soils: Properties, Identification, Classification and Stabilization
(Integritet i vek konstrukcija, specijalno izdanje, 2023)
The application of dispersive soil can result in various types of damage, and even the collapse of embanked build-ings if it is not identified. Dispersive soils cannot be uniquely identified by visual identification in the ...
The influence of high pressures on structural changes of some minerals
(Elsevier Science Bv, Amsterdam, 1997)
An X-ray analysis of some of the most frequently found minerals in natural silicate soils that have previously been subjected to pressures of up to 19 GPa has been performed. The test results have shown that the increase ...