Претраживање
Приказ резултата 1-10 од 65
Application of Paris' Law Under Variable Loading
(Univerzitet u Beogradu - Mašinski fakultet, Beograd, 2022)
The most important characteristics for service safety of welded joints are those describing crack initiation and growth caused by variable loading. Crack initiation and growth caused by variable loading is the subject of ...
The comparative analysis of thermal behaviour of a different thicknesses walls made from autoclaved aerated concrete blocks exposed to fire
(Proceedings of the 19th International Symposium MASE, Ohrid, 2022, 2022)
In this paper a comparative analysis of thermal behavior of six partition walls with different
thicknesses were presented. The walls were dimensions 3000 mm x 3000 mm made from autoclaved
aerated concrete blocks with ...
Aplitic Granite Waste as Raw Material for the Production of Outdoor Ceramic Floor Tiles
(MDPI, 2022)
One of the significant problems in the production of ceramic tiles is the very high consump-tion of natural resources such as clay, feldspar, and quartz. The possibility of replacing part of the formulation of ceramic ...
Fired pressed pellet as a sample preparation technique of choice for an energy dispersive X-ray fluorescence analysis of raw clays
(Elsevier, 2022)
In this paper, the main subject concerns comparing different techniques to prepare raw clay samples for energy dispersive X-ray fluorescence spectrometry (EDXRF). Three kinds of sample preparation procedures are examined,such ...
Structure and properties of ZnO/ZnMn2O4 composite obtained by thermal decomposition of terephthalate precursor
(Journal of the Serbian Chemical Society - JSCS, 2022)
A biphasic [Mn(dipya)(H2O)4](tpht)/{[Zn(dipya)(tpht)]·H2O}n complex material, I, (dipya = 2,2’-dipyridylamine, tpht2– = dianion of terephthalatic acid) was synthesized by ligand exchange reaction and characterized by XRPD ...
Verification and validation of an advanced guardedhot plate for determination of thermal conductivity
(Thermal Science 2022 Volume 26, Issue 6 Part A, Pages: 4735-4747, 2022)
The Guarded hot plate method (GHP) is a widely used technique to measure thermal conductivity of thermal insulation specimens in steady-state conditions. In this paper, an advance of GHP has been developed in the Laboratory ...
Determination of ventilation heat losses through building envelope – a case study
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2022)
In this paper the experimental procedure for the determination of ventilation heat losses across building envelopes has been shown. The alternative name for this method is Blower Door Test or Fan Pressurization method. ...
Estimation of the drying behaviour for different clay raw materials - drying sensitivity techniques review Epitoanyang 2022
(Epitőanyag – Journal of Silicate Based and Composite Materials, 2022)
In order to rate the drying behavior of different clay raw materials it is necessary to establish
the criteria for comparison. Mineralogical composition, clay minerals content, particle size
distribution, packing, porosity, ...
Testing of building materials - reaction to fire
(Proceedings of the 17th Conference with International participation risk and safety engineering, Kopaonik, 2022)
To reduce occurrence of fires in buildings as efficiently as possible, it is necessary to take into account active and passive fire protection measures during construction of building. This paper will show more about passive ...
Raw kaolinitic–illitic clays as high‑mechanical‑performance hydraulically pressed refractories
(Journal of Thermal Analysis and Calorimetry, 2022)
The usage possibility of 19 composites of raw refractory clays from Serbia containing approximately 53.29% of SiO2 and 26.73% of Al2O3 is presented. The sum of fluxing oxides was 57.74%, while these materials contained 32% ...