Претраживање
Приказ резултата 31-40 од 45
Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints
(Elsevier B.V., 2022)
This paper is devoted to the ductile–brittle transition behavior of high strength low alloyed structural steel NIOMOL 490K. This steel grade is designed for welded pressure vessels exposed to dynamic loads, operating at ...
Chemical analysis of historical mortars from the Roman period in Serbia
(Serbian Ceramic Society Conference “Advanced Ceramic and Application X– New frontiers in multifunctional material science and processing”, Beograd, Srbija, 2022)
Stabilization of loess with fly ash
(5th Symposium of the Macedonian Association for Geotechnics MAG and 2nd Conference of Regional Geotechnical Societies ISRM Specialized Conference-Engineering problems in soft Rocks, Ohrid; Macedonia, 2022)
To date, much research has been conducted in the field of the application of fly ash in road construction. Particular attention is paid to the effects of fly ash on soil stabilization. The results of the research show that ...
Monitoring and analyzing the classical counter current industrial tunnel dryer for masonry clay units
(Proceedings of International Conference on Modern Technologies in Industrial Engineering (ModTech 2022), Iasi, Romania, 2022)
This paper goal was to increase the quality of the drying ware and to lower the drying scarp rate in one local brick factory. The registration of drying air parameters (temperature, humidity and velocity) along the dryer ...
Uniaxial compressive strength test before and after standard fire test on rock mass
(Peti simpozijum DGM (Društvo za geotehnika na Makedonija), Ohrid, Zbornik radova, 2022)
The paper presents uniaxial compressive strength test according to SRPS EN 1926. Uniaxial compressive strength test was performed on 12 identical cube-shaped specimen’s dimensions 70 mm x 70 mm x 70 mm, which are made of ...
Numerical simulation of 14Mov6-3 steel CT-specimen Fracture Behavior
(Elsevier B.V., 2022)
Steel grade 14MoV6 3 is used for manufacturing of boilers and steam pipelines designed for steam temperatures up to 560°C. This paper presents the numerical simulation of a CT-specimen, using the finite element method. The ...
Kvalitet tucanika za zastor železničkih pruga, uporedna analiza koeficijenta Los Anđeles i koeficijenta mikro-Deval
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije i Udruženje savremene industrije glinenih proizvoda Srbije, 2022)
Kvalitet kamenog agregata koji se koristi za izradu zastora železničkih pruga u direktnoj je vezi sa životnim vekom ovih saobraćajnica. Odabir kvalitetnog kamenog agregata obezbedjuje stabilan oslonac železničkim kompozicijama, ...
Effects of Maintaining a Building Constructed in the IMS System (Žeželj) with an Approximate Analysis of Hydrodynamical Shock and the Analogy with Lateral Soil Expansion with Cavern Effects During Liquefaction
(Assessment of the Condition, Maintenance and Rehabilitation of Buildings and Settlements, 12th International Conference, Vrnjacka Banja, Serbia, Proceedings, 2022)
The paper indicates the problems of maintaining buildings constructed in the IMS system, founded on piles with a basement floor. Also presented are the problems with the installations of buildings with a roof terrace, such ...
Comparative Analysis of Bearing Capacity of Piles Tested by Dynamic Load Test (DLT) and Pressuremeter Test (PMT)
(5th symposium of the Macedonian Association for Geotechnics, Ohrid, Macedonia, Proceedings, 2022)
The paper presents the comparative analysis of several piles for different pier locations of a bridge by employing in-situ deep foundations tests and in-situ soil tests. The focus of the paper is on the
presentation of ...
Ugljena prašina u energetski efikasnijoj proizvodnji opeke-od laboratorijskih do industrijskih proba
(Zbornik radova sa XXVIII kongresa DIMK i IX kongresa SIGP sa međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija, 2022)