Pretraživanje
Prikaz rezultata 11-20 od 42
Possibility of using bottom ash in precast concrete products
(Croatian Soc Civil Engineers-Hsgi, Zagreb, 2018)
Chemical, physical and mechanical properties of bottom ash from two thermal power plants were analysed in order to evaluate the quality of bottom ash and to determine the possibility of its use in composite materials. It ...
Need to Improve the Natural Aggregate Resources Supply in the City of Belgrade (Serbia)
(Berg Fac Technical Univ Kosice, Kosice, 2016)
The City of Belgrade is the largest market for aggregates in Serbia but the production of natural aggregates is rather small, around five percent of total consumption. This reflects the geology of the City of Belgrade ...
Tertiary plutonic rocks of central and western Serbia Vardar zone as dimension stone
(Berg Fac Technical Univ Kosice, Kosice, 2013)
Five Tertiary granitoid plutons of central and western Serbia Vardar zone are examined in order to establish their potentiality for use as dimension stone. Field studies aimed at establishing the geological factors - ...
Characterization of New Structure for Silicon Carbide X-Ray Detector by Method Monte Carlo
(Polish Acad Sciences Inst Physics, Warsaw, 2011)
This work presents a characterization of radiation absorption properties of silicon carbide (SiC) as semiconductor for the realization of detectors for X-rays. SiC detectors can potentially reach superior performance with ...
Investigation of the mortar and concrete resistance in aggressive solutions
(Univ Osijek, Tech Fac, Slavonski Brod, 2014)
Testing the influence of two aggressive solutions - sulphate and nitrate on mortar and concrete was presented in this paper. Experimental work included testing of mortar prisms with 5 % special admixture. Also, four types ...
Prompt system redesign: Shifting to open source technology to satisfy user requirements
(ComSIS Consortium, 2010)
The paper describes a redesign project undertaken in a short period to adapt a software system to user needs. Additional goals of the project included a shift to Open Source software and the selection of technology to ...
Microstructural analysis as the indicator for suitability of weld repairing of the heat resistant Cr - Ni steel
(Consejo Superior Investigaciones Cientificas-Csic, Madrid, 2010)
Metallurgical evaluation was performed on a fractured column tube of the reformer furnace in an ammonia plant. The tubes were manufactured from centrifugally cast heat resistant steel HK 40. Optical and scanning electron ...
Determination of the apparent porosity level of refractory concrete during a sintering process using an ultrasonic pulse velocity technique and image analysis
(Savez hemijskih inženjera, Beograd, 2010)
Concrete which undergoes a thermal treatment before (pre-casted concrete blocks) and during (concrete embedded in-situ) its life-service can be applied in plants operating at high temperature and as thermal insulation. ...
Influence of the phase composition of refractory materials on creep
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2006)
In this paper, the relationship between the creeping effect and mineralogical characteristics of the applied binding phase for various refractory materials (high-alumina materials, with high or low impurity content, tar ...
Dobijanje metakaolina termičkim tretmanom kaolinske gline / Thermal treatment of kaolin clay to obtain metakaolin
(Savez hemijskih inženjera, Beograd, 2010)
U radu su prikazani rezultati istraživanja dobijanja metakaolina termičkim tretmanom domaće kaolinske gline. Polazna sirovina je bila kaolinska glina sa ležišta Vrbica (Aranđelovački basen), čiji je sadržaj kaolinita oko ...