Search
Now showing items 381-390 of 455
Mathematical approach to application of industrial wastes in clay brick production - Part I: Testing and analysis
(Elsevier Sci Ltd, Oxford, 2015)
The objective of this study was to investigate utilization potential of organic and inorganic industrial wastes in clay bricks. Mineral composition of starting heavy clay sample is tested using an X-ray diffractometer. ...
Mathematical approach to application of industrial wastes in clay brick production-Part II: Optimization
(Elsevier Sci Ltd, Oxford, 2015)
The effects of organic and inorganic waste sludges, coal dust, fly and landfill ashes, soybean crust, sawdust, sunflower flakes and their ash addition to representative heavy clay were investigated. Changes introduced to ...
Analysis of Moisture Transfer During the Drying of Clay Tiles with Particular Reference to an Estimation of the Time-Dependent Effective Diffusivity
(Taylor & Francis Inc, Philadelphia, 2014)
The description of the drying process was reduced to the establishment of a series of theoretical and empirical drying models. The complex processes of simultaneous moisture and heat transfer, which are often nonstationary, ...
Assessing technological properties and environmental impact of fired bricks made by partially adding bottom ash from an industrial approach
(Elsevier Ltd, 2023)
Over the past few decades, the fired clay brick industry has searched for industrial wastes to substitute raw clay deposits and lessen their impact on the environment. Despite several investigations showing positive results, ...
Developing thermal insulation cement-based mortars with recycled aggregate in accordance with net zero principles
(Association for ETRAN Society, 2024)
The performance of thermo-insulation rendering mortars with alternations in ratios of powdered cordierite and talc was examined. The goal was to confirm that recycled kilnware cordierite can be reapplied in the mortar ...
Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT)
(Structural Integrity and Life, Special Issue, 2023)
The paper shows the comparative analysis of behavior and bearing capacity of piles examined using the Dynamic Load Test (DLT) according to Static Load Test (SLT) results. The pile testing methodology is based on the existing ...
Dispersive Soils: Properties, Identification, Classification and Stabilization
(Integritet i vek konstrukcija, specijalno izdanje, 2023)
The application of dispersive soil can result in various types of damage, and even the collapse of embanked build-ings if it is not identified. Dispersive soils cannot be uniquely identified by visual identification in the ...
The influence of high pressures on structural changes of some minerals
(Elsevier Science Bv, Amsterdam, 1997)
An X-ray analysis of some of the most frequently found minerals in natural silicate soils that have previously been subjected to pressures of up to 19 GPa has been performed. The test results have shown that the increase ...
Uticaj provlažavanja tla na oštećenje objekta / Influence of the soil dampening on the structure damage
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2001)
Rezultati istraživanja prikazani u ovom radu pokazuju da provlažavanje podtemeljnog tla može da izazove bitne promene fizičko-mehaničkih svojstava tla. Tepromene se ogledaju u smanjenju modula stišljivosti, čvrstoće tla ...
Classification tools based on artificial neural networks for the purpose of identification of origin of organic matter and oil pollution in recent sediments
(TU Munchen, 1998)
The distinction between autochthonous, and oil-like origin of organic matter in geological sediments can be performed on the basis of n-alkane abundance and distribution patterns, determined by gas chromatography, or on ...