Претраживање
Приказ резултата 11-20 од 38
Novel application of fractal analysis in refractory composite microsturctural characterization
(American Ceramic Society, 2016)
Fractal geometry theory implied in a composite surface topographic analysis as a means of explanation of the structural characteristics has hardly been reported so far. This paper proposes a new method of roughness peaks ...
An analysis of the influence of weldment heterogeneity in ferrite-austenite welded structure
(Welding in the World, 2009)
An analysis of the influence of heterogeneity of the ferriteaustenite welded joint on its integrity has been performed. The Charpy specimens, with notch positioned in different regions of welded joint, have been tested ...
Convergence Predictions and Primary Support Optimization of the Tunnel Progon
(Springer Int Publishing Ag, Cham, 2015)
The tunnel Progon is being constructed as a part of Corridor 10 highway project about 5 km north from the border crossing with Bulgaria in southern Serbia. During the design process 2D finite element analysis was utilized ...
Determination of LCF Plastic and Elastic Strain Components of Steel
(Springer Science and Business Media B.V., 2022)
The behavior of steel in low-cycle fatigue (LCF) is tested experimentally, in accordance with ISO 12106:2017 (E) and/or ASTM E 606-04. For this purpose, smooth specimens which are exposed to low-cycle fatigue at several ...
Drying kinetic simulation of clay tiles made from the raw material having less clay fraction
(Trans Tech Publications Ltd, 2014)
In order to describe the internal moisture rate and to take all different mechanisms of moisture movement into account, it is suitable to use effective diffusivity as a measure of moisture rate, irrespectively of the ...
Mix design and engineering properties of ultra high performance self compacting concrete
(Czech Concrete Soc-Ceska Betonarska Spolecnost Cssi, Prague 1, 2011)
The mechanical properties (compressive strength and flexural strength) were investigated under different curing conditions (standard and steam curing). Silica fumes have characteristics that make them necessary in cement ...
Linings based chromite for application in foundry
(ModTech Publishing House, 2012)
In this work, a possibility to develop new chromite-based refractory linings for casting applications has been examined. Lining composition optimization with the controlled reologic properties was achieved by applying ...
Microstructure analysis and crack detection in turbine blades after prolonged exposure in plant
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
Turbine blades are one of the most important machine parts in every power generator. Corrosion and/or erosion attack on blades are also available in moisture atmosphere, because the wet water vapour is an usual working ...
Review of results of interlaboratory comparisons of national accredited laboratorys in the free field noise level measurements
(IEEE, NEW YORK, 2015)
Interlaboratory comparisons in the field of enviromental noise level measurements were organized by IMS Institute in Belgrade in August this year as a part of the standard noise monitoring according to of the method given ...
Establishing a method for determination of effective diffusion coefficiente
(ModTech Publishing House, 2011)
The aim of this paper is to calculate the effective diffusion coefficient for typical masonry clay on the base of experimentally recorded drying curves. Two computer programs for calculation of diffusion coefficient, which ...