Претраживање
Приказ резултата 11-20 од 38
Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin
(Springer, Dordrecht, 2018)
Kaolin from a Serbian deposit, having a high content of mica and quartz, disordered kaolinite and a high specific surface area, was used to prepare metakaolin (MK). The calcination at temperatures of 700 degrees C or 750 ...
Properties of the Cement-Based Composites with High Content of Metakaolin
(Springer, Dordrecht, 2018)
Environmental concerns and sustainable development require increased replacement of cement. Most of previous studies have shown that the compressive strength of cement-based composites is maximized with a 20% content of ...
State Analysis and Integrity of Welded Structures of the Upper Ring of the Turbine Runner Guide Vane Apparatus of Hydroelectric Generating Set A6 on Hydro Power Plant Djerdap 1
(Trans Tech Publications Ltd, Durnten-Zurich, 2013)
During the refurbishment of the hydroelectric generating set A6 on HPP "Djerdap 1", for the state analysis and assessment of the level and causes of degradation of the structure of the vertical Kaplan turbine runner guide ...
Prediction model for the cost of road rehabilitation and reconstruction works
(Univ Zagreb, Fac Civil Engineering, Zagreb, 2012)
Maintenance of existing road network represents a challenge for public road authorities who seek a balance between available budgets and the need for maintaining level of service at a satisfactory level on existing road ...
Drying Process Modelling for Heavy Clay Products Using a New Thin Layer Drying Model
(Trans Tech Publications Ltd, Stafa-Zurich, 2013)
Drying results, determined on samples made of masonry clay from the locality "Banatski Karlovac", are presented in this study. Experimental investigations were carried out in a laboratory recirculation dryer in which drying ...
Influence of Si content and cooling rates on the size of SDAS and the latent heat released in Al-Si(5-11)-Cu1 alloys
(Proceedings - European Metallurgical Conference, EMC 2007, 2007)
The latent heat of solidification of any alloy depends on the chemistry and the microstructure developed during solidification process. Effects of chemistry on the release of the latent heat during solidification and ...
Some experience of concrete design in marine structures
(Thomas Telford Services Ltd, 2005)
For reconstruction of northwest breakwater in Tripoli harbour / Libya, about 4500 m long, it is necessary to produce various concrete elements (cubes and accropodes) in total amount of 550000 m 3 . Volumes of cubes are ...
Sulphur concrete
(Structural Engineering Conferences, SECON, 2007)
Sulphur concrete is a relatively new material, and although similar in final appearance to portland cement concrete, its manufacture, handling, use, and testing are different. Sulphur concrete is a thermoplastic material ...
Linings based chromite for application in foundry
(ModTech Publishing House, 2012)
In this work, a possibility to develop new chromite-based refractory linings for casting applications has been examined. Lining composition optimization with the controlled reologic properties was achieved by applying ...
Microstructure analysis and crack detection in turbine blades after prolonged exposure in plant
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
Turbine blades are one of the most important machine parts in every power generator. Corrosion and/or erosion attack on blades are also available in moisture atmosphere, because the wet water vapour is an usual working ...