Претраживање
Приказ резултата 11-20 од 217
The comparative analysis of thermal behaviour of a different thicknesses walls made from autoclaved aerated concrete blocks exposed to fire
(Proceedings of the 19th International Symposium MASE, Ohrid, 2022, 2022)
In this paper a comparative analysis of thermal behavior of six partition walls with different
thicknesses were presented. The walls were dimensions 3000 mm x 3000 mm made from autoclaved
aerated concrete blocks with ...
Aplitic Granite Waste as Raw Material for the Production of Outdoor Ceramic Floor Tiles
(MDPI, 2022)
One of the significant problems in the production of ceramic tiles is the very high consump-tion of natural resources such as clay, feldspar, and quartz. The possibility of replacing part of the formulation of ceramic ...
Numerical model of fluid-structure interaction for water tower analysis of vibrations
(Institut za ispitivanje materijala, BeogradDruštvo za integritet i vek konstrukcija (DIVK), 2020)
This paper deals with the aspects of vibration analysis of 3D numerical water tower models with the explicitly generated 3D finite element (FE) solid fluid model that simulates the fluid-structure interaction (FSI). The ...
Assessment of Efficiency of Rare Earth Elements Recovery from Lignite Coal Combustion Ash via Five-Stage Extraction
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2021)
Rare earth elements (REE) are frequently referred to as ingredients for enhancements in modem industry, as they are extensively applied in many industrial branches due to their accented electro-magnetic and optical properties. ...
Application of Paris' Law Under Variable Loading
(Univerzitet u Beogradu - Mašinski fakultet, Beograd, 2022)
The most important characteristics for service safety of welded joints are those describing crack initiation and growth caused by variable loading. Crack initiation and growth caused by variable loading is the subject of ...
Experimental and Discrete Element Model Investigation of Limestone Aggregate Blending Process in Vertical Static and/or Conveyor Mixer for Application in the Concrete Mixture
(MDPI, Basel, 2021)
The numerical model of the granular flow within an aggregate mixture, conducted in the vertical static and/or the conveyor blender, was explored using the discrete element method (DEM) approach. The blending quality of ...
Characterization of drying behavior and modeling of industrial drying process
(IOP Publishing Ltd, Bristol, 2020)
The general method for industrial chamber dryer optimization was reported in this paper. The first step in finding the most suitable drying regime is to characterized the clay raw material, especially its water loss at ...
X-ray fluorescence spectroscopy of eggshells as a potential raw material in the construction industry
(Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, 2023)
Due to its chemical composition based on CaCO3 and low price, eggshells, as waste from one of the most widely consumed foods worldwide, are receiving increased attention in building and construction industry studies. The ...
An Artificial Neural Network-based Prediction Model for Utilization of Coal Ash in Production of Fired Clay Bricks: A review
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2021)
This study analyzed the last 20 years' data available on power plant coal ashes used in clay brick production. The statistical analysis has been carried out for a total of 302 cases based on the relevant parameters reported ...
Performances of Vermiculite and Perlite Based Thermal Insulation Lightweight Concretes
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2020)
This experimental study was conducted with an aim to investigate the effect of the elevated temperature on the mineral phase composition, microstructure and mechanical properties of the thermal insulation lightweight ...