Претраживање
Приказ резултата 1-10 од 12
Microstructure analysis and crack detection in turbine blades after prolonged exposure in plant
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
Turbine blades are one of the most important machine parts in every power generator. Corrosion and/or erosion attack on blades are also available in moisture atmosphere, because the wet water vapour is an usual working ...
Linings based chromite for application in foundry
(ModTech Publishing House, 2012)
In this work, a possibility to develop new chromite-based refractory linings for casting applications has been examined. Lining composition optimization with the controlled reologic properties was achieved by applying ...
Quantification of stress raiser influence on decrease of machine parts fatigue life
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
This paper displays the usage of Theory of Critical Distances (TCD) in the prediction of high-cycle fatigue behaviour in machine parts and systems. It is possible to gain real overview of stresses of machine parts by Finite ...
Prediction of crack initiation in spur gear contact zone
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
The objective of this paper is to give a new viewpoint in contact fatigue prediction in the case of high-cycle fatigue. The presented research is based on up-to-date methods and multidisciplinary approach, and enables ...
The possibility of obtaining. Composite al18wt%si/sic by compocasting process
(ModTech Publishing House, 2012)
The aim of this study was to investigate the influence of various process parameters on the microstructure of composite materials based on alloys All 8Wt%Si with the addition of 10Wt%SiC. The effect of stirring speed (1000 ...
The failures of a supporting structure of a coal-reloading bridge and methodological approach to recovery of the damages
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
In present paper, methodological approach to the analysis of the failures and recovery of the damages has been presented on an example of fracture and damage of a structure of the reloading bridge. The approach presented ...
Determination of the optimal drying condition during drying of green masonry products
(ModTech Publishing House, 2012)
Explanation of the drying process is reduced to the establishment of a series theoretical and empirical drying models. Complex processes of simultaneous mass and energy transfer, which are often non-stationary and the ...
Prediction model for the cost of road rehabilitation and reconstruction works
(Univ Zagreb, Fac Civil Engineering, Zagreb, 2012)
Maintenance of existing road network represents a challenge for public road authorities who seek a balance between available budgets and the need for maintaining level of service at a satisfactory level on existing road ...
Comparative analysis of fly ash management in Europe and Serbia: aspects and regulations
(Chymicus IV, 2012)
This paper presents a comparative analysis of the fly ash management in Europe and Serbia, as well as its application the building materials production, with special reference to the existing legislation.
The draft ...
Ispitivanja turbinskih vratila u funkciji donošenja odluke o sanaciji
(University of Zenica, Faculty of Mechanical Engineering, Bosna i Hercegovina, 2012)
Nakon preko 20 godina rada agregata na HE Đerdap II, u cilju utvrđivanja stanja turbinskih vratila
izvršena su detaljna ispitivanja metodama IBR. Na svim vratilima utvrđene su površinske prsline
različitih dužina i dubina, ...