Претраживање
Приказ резултата 11-20 од 31
Application of Results of Nondestructive Testing Methods in the Investigation of Microstructure of Refractory Concretes
(ASCE - American Society of Civil Engineers, 2010)
The aim of this investigation is to establish the correlation between concrete porosity, compressive mechanical strength, and microstructure using the results of nondestructive testing methods, i.e., ultrasonic pulse ...
Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons
(Maney Publishing, Leeds, 2013)
The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, ...
Development of New Cordierite-Based Refractory Coatings for Casting Applications
(Wiley, Hoboken, 2014)
In this study, new refractory coatings based on synthesized cordierite for the casting applications were developed. The investigation included starting raw materials characterization, synthesis of the cordierite, design ...
Evalution of concretes with standard and recycled raw materials for high temperature application
(Revista Romana de Materiale/ Romanian Journal of Materials, 2012)
Concrete undergoing thermal treatment before and during life-service can be applied as building material for thermal insulation in high-temperature plants. When such concretes are designed with secondary raw materials they ...
A Kinetic Study of Limestone Dry Micronization in an Ultra-Centrifugal Mill with Peripheral Comminuting Path
(Goller Verlag Gmbh, Baden Baden, 2017)
Because of its physico-mechanical and physico-chemical characteristics, fine-ground (i.e. micronized) limestone is widely applied in the production of new materials. Limestone can be used as a filler, coating and/or powder ...
Identification of low cycle fatigue parameters of high strength low-alloy (HSLA) steel at room temperature
(Croatian Metallurgical Soc, Zagreb, 2014)
Low cycle fatigue test was performed in ambient atmosphere at room temperature. cycle loading of material, in case of High strength low-alloy steel, entails modifications of its properties and in this paper is therefore ...
Synthesis and characterization of new refractory coatings based on talc, cordierite, zircon and mullite fillers for lost foam casting process
(Polska Akad Nauk, Polish Acad Sciences, Inst Metall & Mater Sci Pas, Warszawa, 2014)
Refractory coatings based on different refractory fillers (talc, cordierite, zircon and mullite) for application in Lost Foam casting process were investigated. Design and optimization of the coatings composition with ...
Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash
(Springer, Dordrecht, 2015)
The effects that the fly ash addition has on the behavior of thermally resistant corundum concrete were discussed. Experimental program implied production of two refractory composites: "referent" concrete from 20 % of ...
Determination of the moisture diffusivity coefficient and mathematical modeling of drying
(Elsevier Science Sa, Lausanne, 2014)
Drying plays an important role in the production of clay tiles. In the present article, drying process is analyzed taking experimental data for several masonry clays obtained from different clay tile manufacturers and ...
MSV sistem za obradu signala sa neutron-gama diskriminacijom u mešovitom polju / MSV signal processing system for neutron-gamma discrimination in a mixed field
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2012)
Na osnovu principa koji su proizišli iz Kempbelove teoreme, u ovom radu je urađena analiza nekih mogućnosti Kempbelovog MSV sistema za obradu signala. MSV mod je posebno pogodan za merenja koja se sprovode u mešovitom polju ...