Претраживање
Приказ резултата 1-10 од 116
Determination of LCF Plastic and Elastic Strain Components of Steel
(Springer Science and Business Media B.V., 2022)
The behavior of steel in low-cycle fatigue (LCF) is tested experimentally, in accordance with ISO 12106:2017 (E) and/or ASTM E 606-04. For this purpose, smooth specimens which are exposed to low-cycle fatigue at several ...
Characterization of drying behavior and modeling of industrial drying process
(IOP Publishing Ltd, Bristol, 2020)
The general method for industrial chamber dryer optimization was reported in this paper. The first step in finding the most suitable drying regime is to characterized the clay raw material, especially its water loss at ...
X-ray fluorescence spectroscopy of eggshells as a potential raw material in the construction industry
(Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, 2023)
Due to its chemical composition based on CaCO3 and low price, eggshells, as waste from one of the most widely consumed foods worldwide, are receiving increased attention in building and construction industry studies. The ...
HSLA Steel - Simulation of Fatigue
(Springer, 2020)
In present paper, based on the results of the experimental study of the behaviour of the samples made of a HSLA steel, in the form of round smooth specimens (RSS) under LCF conditions (with controlled and completely ...
The comparative analysis of thermal behaviour of a different thicknesses walls made from autoclaved aerated concrete blocks exposed to fire
(Proceedings of the 19th International Symposium MASE, Ohrid, 2022, 2022)
In this paper a comparative analysis of thermal behavior of six partition walls with different
thicknesses were presented. The walls were dimensions 3000 mm x 3000 mm made from autoclaved
aerated concrete blocks with ...
A Theoretical Model for Vibro-Impact Dynamics of Spur Gears with Tooth Flanks Wear
(Springer Nature, 2020)
The main performance of involute gears operation leads to the appearance of nonlinear dynamic behavior and impact. In this chapter the influence of mild wear of the tooth flanks of gears without machine finishing and surface ...
Failure analysis of ATR 72 tow bar–opportunity for re-design for inspection
(10th EASN Virtual International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens, 2020)
The safe towing of aircraft is an important part in aviation security. Failures during the towing and parking
related operations are not so rare due to bad working circumstance, human error, etc. Tow bars are simple
but ...
The Influence of Parameters of Sand Soil on States PH 2D Frame on Seismic Response
(University of Belgrade - Faculty of Mechanical Engineering, 2023)
During earthquakes that exceed the designed level of the structure, the structure gets damaged. Here, the structure-foundation-soil is considered as a system, and the effect of the soil on the piles can be replaced by ...
Effects of Maintaining a Building Constructed in the IMS System (Žeželj) with an Approximate Analysis of Hydrodynamical Shock and the Analogy with Lateral Soil Expansion with Cavern Effects During Liquefaction
(Assessment of the Condition, Maintenance and Rehabilitation of Buildings and Settlements, 12th International Conference, Vrnjacka Banja, Serbia, Proceedings, 2022)
The paper indicates the problems of maintaining buildings constructed in the IMS system, founded on piles with a basement floor. Also presented are the problems with the installations of buildings with a roof terrace, such ...
Influence of different types of fibers on the ultimate and residual flexural strength of sprayed concrete
(Proceedings of the 2nd International Conference CoMS 2020/21, 2021)
The influence of the application of different types of fibres on the flexural strength of beams cut from slabs of
sprayed concrete is presented in the paper. Fibres of different materials, shapes and dimensions were used. ...