Претраживање
Приказ резултата 1-10 од 106
X-ray fluorescence spectroscopy of eggshells as a potential raw material in the construction industry
(Serbian Ceramic Society Conference “Advanced Ceramic and Application XI – New frontiers in multifunctional material science and processing”, Book of Abstracts, 2023)
Due to its chemical composition based on CaCO3 and low price, eggshells, as waste from one of the most widely consumed foods worldwide, are receiving increased attention in building and construction industry studies. The ...
Characterization of drying behavior and modeling of industrial drying process
(IOP Publishing Ltd, Bristol, 2020)
The general method for industrial chamber dryer optimization was reported in this paper. The first step in finding the most suitable drying regime is to characterized the clay raw material, especially its water loss at ...
The comparative analysis of thermal behaviour of a different thicknesses walls made from autoclaved aerated concrete blocks exposed to fire
(Proceedings of the 19th International Symposium MASE, Ohrid, 2022, 2022)
In this paper a comparative analysis of thermal behavior of six partition walls with different
thicknesses were presented. The walls were dimensions 3000 mm x 3000 mm made from autoclaved
aerated concrete blocks with ...
Failure analysis of ATR 72 tow bar–opportunity for re-design for inspection
(10th EASN Virtual International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens, 2020)
The safe towing of aircraft is an important part in aviation security. Failures during the towing and parking
related operations are not so rare due to bad working circumstance, human error, etc. Tow bars are simple
but ...
Fatigue crack growth rate of a low carbon microalloyed steel for elevated temperature application
(2nd International Symposium on Risk Analysis and Safety of Complex Structures and Components (IRAS 2023), 2023)
The operating temperature influence on the fatigue crack growth parameter, was analyzed by testing the
chromium-molybdenum steel for elevated temperatores application of the new generation additionally alloyed with
vanadium. ...
The Influence of Parameters of Sand Soil on States PH 2D Frame on Seismic Response
(University of Belgrade - Faculty of Mechanical Engineering, 2023)
During earthquakes that exceed the designed level of the structure, the structure gets damaged. Here, the structure-foundation-soil is considered as a system, and the effect of the soil on the piles can be replaced by ...
The Finite Element Method in the function of corrosion damage assessment of pipelines
(SERBIAN SOCIETY OF CORROSION AND MATERIALS PROTECTION (UISKOZAM), 2023)
Pipelines, with specifics in design, construction, testing and safety requirements must be designed
based on all relevant influences to ensure that they are safe during their working life. Allowable
stresses must be ...
Effects of Maintaining a Building Constructed in the IMS System (Žeželj) with an Approximate Analysis of Hydrodynamical Shock and the Analogy with Lateral Soil Expansion with Cavern Effects During Liquefaction
(Assessment of the Condition, Maintenance and Rehabilitation of Buildings and Settlements, 12th International Conference, Vrnjacka Banja, Serbia, Proceedings, 2022)
The paper indicates the problems of maintaining buildings constructed in the IMS system, founded on piles with a basement floor. Also presented are the problems with the installations of buildings with a roof terrace, such ...
Influence of different types of fibers on the ultimate and residual flexural strength of sprayed concrete
(Proceedings of the 2nd International Conference CoMS 2020/21, 2021)
The influence of the application of different types of fibres on the flexural strength of beams cut from slabs of
sprayed concrete is presented in the paper. Fibres of different materials, shapes and dimensions were used. ...
Effects of Alloying Elements on the Properties of HSLA Steel
(University of Belgrade - Faculty of Mechanical Engineering, 2023)
The first industrial application of elevated and high-strength steel in the form of hot-rolled strips and sheets
was the manufacture of pipes and vessels under pressure, as it was possible to reduce the thickness, i.e. ...