Претраживање
Приказ резултата 1-10 од 70
Structural Integrity Assessment of Welded Pressure Vessel Produced of HSLA Steel
(Journal Iron Steel Research Editorial Board, Beijing, 2011)
Welded joint is a critical region of a welded structure. The operational safety of welded pressure equipment mostly depends on the behaviour of loaded weldments. Safety of welded structure is dependent on the properties ...
Influence of increased temperature on clay fast drying process
(Revista Romana de Materiale/ Romanian Journal of Materials, 2009)
In this paper are presented testing results during process of fast drying at conditions of increased temperature. Three different masonry raw materials were examined using recircular laboratory dryer with air recirculation. ...
The influence of silica fume and curing regime on some properties of concrete
(Revista Romana de Materiale/ Romanian Journal of Materials, 2014)
The investigation of posibilities of concrete structure modification by silica fume to improve concrete properties was presented in this report. Percentage of silica fume in regard to cement varied between 0% and 20%. ...
Sintering of Fly Ash Based Composites with Zeolite and Bentonite Addition for Application in Construction Materials
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
Due to pozzolanic characteristics, fly ash is commonly used as a cement replacement in construction composites. Addition of natural clays with sorption ability (i.e. zeolite and bentonite) in to the fly ash based construction ...
Transport and storage of heavy metals in the Sava River Basin in Serbia
(Srpsko hemijsko društvo, Beograd, 2014)
Selected heavy metals (Cu, Zn, Pb and Cd) in the water and sediment of the Sava River in Serbia were investigated from three locations in the vicinity of industrial and urban settlements (Sabac, Obrenovac and Belgrade) ...
Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2015)
This study presents the results of an investigation of high-temperature materials refractory coatings based on different refractory fillers including talc, cordierite, zircon and mullite applied in the lost-foam casting ...
Investigation of high temperature behavior and sintering mechanism of fly ash based concretes
(Procema SA, 2014)
Four types of refractory concretes were studied at various temperatures ranging from ambient to adopted maximal 1400 degrees C. The concretes had same matrix composition: K concretes were based on corundum aggregate; B ...
Monte Carlo Analysis of the Influence of Different Packaging on MOSFET Energy Response to X-rays and Gamma Radiation
(Polish Acad Sciences Inst Physics, Warsaw, 2012)
Radiation sensing MOSFETs have found numerous applications as detectors or device components in radiation fields used in nuclear industry, medical applications and space research. Monte Carlo simulations of MOSFET energy ...
Model of Probabilistic Analysis of Pile Capacity Based on the Extrapolation of Load-Settlement Curves
(Springer, New York, 2020)
This paper formulates a mathematical model using the extrapolation of load-settlement curves with a rational function for analyzing the capacity of piles obtained from the static load test (SLT). In preliminary analyses, ...
Influence of the phase composition of refractory materials on creep
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2006)
In this paper, the relationship between the creeping effect and mineralogical characteristics of the applied binding phase for various refractory materials (high-alumina materials, with high or low impurity content, tar ...