Претраживање
Приказ резултата 21-30 од 38
Novel Utilization of Fly Ash for High-Temperature Mortars: Phase Composition, Microstructure and Performances Correlation
(Wiley, Hoboken, 2015)
In this study, the feasibility of using fly ash to manufacture high-temperature mortars was investigated. The investigation was set to define preliminary characteristics of new types of mortars based on ordinary and/or ...
Stress concentration factors in re-evaluation of design solution
(Serbian Society of Mechanics and Faculty of Technical Sciences Novi Sad, 2015)
The failures of various parts of mechanical systems in powe industry are the lessons that should be learned thoroughly. Every behaviour of structure close to design encelope must be ecxamined carefully in order to minimize ...
Effects of operation temperature on thermal expansion and main parameters of radial ball bearings
(Univerzitet u Beogradu - Institut za nuklearne nauke Vinča, Beograd, 2015)
The research of influence of operation temperature on the thermal expansion and main parameters of radial ball bearings is presented in this paper. The main bearing parameters are identified in accordance with the increasing ...
Factor space differentiation of brick clays according to mineral content: Prediction of final brick product quality
(Elsevier Science Bv, Amsterdam, 2015)
Chemical composition and XRD qualitative analysis were used to calculate mineral contents of 139 brick clay raw materials using LPNORM. The second order polynomial models (SOP) for all the samples, which express the relation ...
Network-level pavement life-cycle assessment tool
(CRC Press/Balkema, 2015)
In addition to their attempt to keep overall maintenance costs low while keeping their road networks in the appropriate condition, road agencies are facing even more demanding challenges as they incorporate effects on ...
Simulation of the kinematic hardening of AISI 316 steel by nonlinear finite element analysis
(Serbian Society of Mechanics and Faculty of Technical Sciences Novi Sad, Serbia, 2015)
The coupled non-linear transient calculation is performed and explained in order to simulate the kinematic hardening behavior of AISI 316 steel and the Finite Element Method (FEM) is used for presented simulation. The ...
The main factors influencing canine demodicosis treatment outcome and determination of optimal therapy
(Springer, New York, 2015)
The main idea of this research was to evaluate the efficacy of canine demodicosis conventional treatments using mathematical analyses. All available papers published between 1980 and 2014 were used in this study. One hundred ...
Effects of mechanical activation on the parameters of talc quality for ceramics production - Chemometric approach
(Elsevier Sci Ltd, Oxford, 2015)
Talc is broadly used in the ceramic materials industry, either as a basic raw material, or as filler, due to its chemical inertia, fragmentation proneness, thermal stability, and refractoriness. The mechanical activation ...
Non-typical defects on surfaces of ceramic and roof tiles: Nature and the causes
(ModTech Publishing House, 2015)
This research was conducted to identify the nature and the cause of non-typical defects which appeared on the visible surfaces of ceramic and roof tiles. Microstructural analysis was conducted via optical microscope and ...
The effect of amorphous kaolin on properties of cement-based composites
(3rd International Conference of the Serbian Society for Ceramic Materials -, 2015)