Претраживање
Приказ резултата 121-130 од 136
The main factors influencing canine demodicosis treatment outcome and determination of optimal therapy
(Springer, New York, 2015)
The main idea of this research was to evaluate the efficacy of canine demodicosis conventional treatments using mathematical analyses. All available papers published between 1980 and 2014 were used in this study. One hundred ...
Effects of mechanical activation on the parameters of talc quality for ceramics production - Chemometric approach
(Elsevier Sci Ltd, Oxford, 2015)
Talc is broadly used in the ceramic materials industry, either as a basic raw material, or as filler, due to its chemical inertia, fragmentation proneness, thermal stability, and refractoriness. The mechanical activation ...
Non-typical defects on surfaces of ceramic and roof tiles: Nature and the causes
(ModTech Publishing House, 2015)
This research was conducted to identify the nature and the cause of non-typical defects which appeared on the visible surfaces of ceramic and roof tiles. Microstructural analysis was conducted via optical microscope and ...
Factor space differentiation of brick clays according to mineral content: Prediction of final brick product quality
(Elsevier Science Bv, Amsterdam, 2015)
Chemical composition and XRD qualitative analysis were used to calculate mineral contents of 139 brick clay raw materials using LPNORM. The second order polynomial models (SOP) for all the samples, which express the relation ...
Network-level pavement life-cycle assessment tool
(CRC Press/Balkema, 2015)
In addition to their attempt to keep overall maintenance costs low while keeping their road networks in the appropriate condition, road agencies are facing even more demanding challenges as they incorporate effects on ...
Novel Utilization of Fly Ash for High-Temperature Mortars: Phase Composition, Microstructure and Performances Correlation
(Wiley, Hoboken, 2015)
In this study, the feasibility of using fly ash to manufacture high-temperature mortars was investigated. The investigation was set to define preliminary characteristics of new types of mortars based on ordinary and/or ...
Primena postupaka poroziranja opekarskih proizvoda sekundarnim sirovinama / Improving porosity of heavy clay bricks using secondary raw materials
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2011)
Uvažavajući zahteve održivog razvoja u ciglarskoj industriji poslednjih godina se sve više istražuje mogućnost upotrebe otpada u kompozitima na bazi gline, u cilju očuvanja prirodnih resursa, sirovina i energije. U ovom ...
Primena postupaka za izdavanje eko-deklaracija za građevinske proizvode / Application of procedures for issuing eco-declarations for construction products
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2018)
Postupci za pripremu eko-deklaracija za građevinske proizvode i zgrade zasnovani su na standardizovanim metodama. Deklaracije proizvoda o zaštiti životne sredine (EPD) pripadaju tipu III eko-deklaracija. EPD sadrži ...
Procedure for setting up the drying regime that is consistent with the nature and properties of the clay raw material
(Taylor & Francis Inc, Philadelphia, 2018)
Over the past three decades, traditional ceramic facilities, such as chamber and tunnel dryers, are improved. Better thermotechnical equipment, operational strategies, and reliable scale-up methodologies have lead to higher ...
Novel application of fractal analysis in refractory composite microsturctural characterization
(American Ceramic Society, 2016)
Fractal geometry theory implied in a composite surface topographic analysis as a means of explanation of the structural characteristics has hardly been reported so far. This paper proposes a new method of roughness peaks ...