Претраживање
Приказ резултата 111-120 од 120
Improvement and modification of the energy-dispersive X-ray fluorescence method for the determination of metal elements in cement leachates - A chemometric approach
(Srpsko hemijsko društvo, Beograd, 2020)
A modification of an analytical procedure for the energy-dispersive X-ray fluorescence (EDXRF) quantification of ten chemical elements (As, Ba, Cd, Co, Cr, Cu, Mo, Ni, Pb and Zn) in the leachates obtained from cement binders ...
Mehanizmi i morfologije kavitacionog oštećenja čelika Nionikral 70 / Mechanisms and morphologies of cavitation damage of NN 70 steel
(Inženjersko društvo za koroziju, Beograd, 2021)
Polomljene epruvete za ispitivanje niskocikličnim zamorom čelika Nionikral 70 (NN-70) osnovnog materijala (OM) i simulirane zone pod uticajem toplote (SZUT) poslužile su NAM za izradu uzoraka za ispitivanje otpornosti na ...
Determination of the Coffin-Manson equation under low-cycle fatigue conditions
(Institut za ispitivanje materijala, Beograd, 2021)
The cycle loading of a material results in the modification of its properties and so in this paper is presented the behaviour of the fatigue life using low-cycle fatigue parameters. By applying the Coffin-Manson equation ...
Determination of the Pile Stiffness Matrix Based on the Pile Load Test Results and the Effect of Pile Interaction
(Univ Osijek, Tech Fac, Slavonski Brod, 2020)
The paper presents the determination of the elements of the pile stiffness matrix based on pile load test results, made for the needs of modernization of oil refinery for NIS in Pancevo. The tests were carried out on CFA ...
Deflection Calculation for Beam-type Structures from Measured Strain Data
(Univ Osijek, Tech Fac, Slavonski Brod, 2020)
Behavior of structures under various load types is determined by their deformation characteristics, global deformation characteristics - deflections and rotations, and local deformation characteristics - strains / stresses ...
Strength of the Welded Joint with Improved Mechanical Properties of Weld Metal and Heat Affected Zone
(Faculty of Mechanical and Civil Engineering in Kraljevo, Serbia, 2021)
Selection of steel, dimensions and fabrication technology for the welded structure are all parts of the design
process, because they are in close connection with the function of the structural whole under certain conditions ...
Effect of temperature and specimen orientation on Charpy impact toughness
(Elsevier, 2022)
Steel grade 14MoV6 3 is used for manufacturing of boilers and steam pipelines designed for steam temperatures up to 560°C. This paper presents the experimental analysis which included impact toughness test. The analysis ...
Lamellar Tearing of Parent Material and Degradation of Welded Joints at Vital Welded Structures
(Savez energetičara, 2021)
Vertical Kaplan turbines, manufactured in Russia, are
installed in 6 hydroelectric generating units at ‘Djerdap 1’, with
nominal power of 176 MW each. Because of the structural
solution and inability of performing ...
Use of iron ore tailings for production of concrete paving blocks
(Faculty Of Civil Engineering, University of Montenegro, 2020)
The possibility of using tailings from the iron mine (IOT) in the production of concrete elements for the pedestrian areas is shown in this paper. To determine the impact of the amount of tailings on the compressive strength ...
Review of research and business results of the IMS Institute - in 2022
(Beograd : Institut za ispitivanje materijala, 2022)