Претраживање
Приказ резултата 61-70 од 140
Defining a procedure for predicting the duration of the approximately isothermal segments within the proposed drying regime as a function of the drying air parameters
(IOP Publishing Ltd, Bristol, 2017)
One of the main disadvantages of the recently reported method, for setting up the drying regime based on the theory of moisture migration during drying, lies in a fact that it is based on a large number of isothermal ...
Setting up the drying regimes based on the theory of moisture migration during drying
(IOP Publishing Ltd, Bristol, 2016)
Drying is energy intensive process which has important effect on the quality of the clay tiles that are dried commercially. Chamber and tunnel dryers are constantly improving. Better technical equipment and operational ...
Statistical analysis of shear strength of welds in welded fabric for civil engineering with application of new tool design
(The Association of Metallurgical Engineers of Serbia, Belgrade, Serbia, 2019)
Many new requirements in the field of testing of metals, emphasize traceability
and accuracy of test results as of the end goal. These requirements have hidden
context with emphasis on energy efficiency too., which is ...
Novel application of fractal analysis in refractory composite microsturctural characterization
(American Ceramic Society, 2016)
Fractal geometry theory implied in a composite surface topographic analysis as a means of explanation of the structural characteristics has hardly been reported so far. This paper proposes a new method of roughness peaks ...
Analysis of the state of construction waste management in republic of Serbia
(In Conference Proceedings of People, Buildings and Environment 2016, an International Scientific Conference, vol. 4, Luhačovice, Czech Republic, pp. 221-229, 2016)
Construction waste includes waste generated during construction, reconstruction, maintenance or demolition of existing buildings, as well as waste generated from excavated material, which cannot be used without prior ...
Common failures in aluminothermic welding process and proposal for their prevention
(University of Zagreb, Faculty of Metallurgy, 2018)
Aluminothermic welding of rail is still a unique method for joining the rails because of its flexibility
and ease of performance, both during the reconstruction and construction of a new track, as well as
in the ongoing ...
Design of the transition zone of turbine shaft to flange by biomimetics principles
(University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, 2018)
The consideration of the optimal design of the transition zone of turbine shaft to flange has a high impact within the turbines design. The main principles of biomimetics give a new and prosperous point of view on the ...
The influence of grooves on the behavior of steel tube shock absorbers
(Proceedings of the 7h International Congress of Serbian Society of Mechanics, Sremski Karlovci, Serbia, 2019)
Major function of railway vehicles absorbers is to absorb energy through controlled deformation during frontal rail vehicle collisions. The results presented and discussed in this paper is a part of the research of one ...
Stress concentration factors in re-evaluation of design solution
(Serbian Society of Mechanics and Faculty of Technical Sciences Novi Sad, 2015)
The failures of various parts of mechanical systems in powe industry are the lessons that should be learned thoroughly. Every behaviour of structure close to design encelope must be ecxamined carefully in order to minimize ...
Neki slučajevi oštećenja i sanacije srednjeg rama mosta nakon zemljotresa
(Savez građevinskih inženjera Srbije, Vršac, 2017)