Претраживање
Приказ резултата 61-70 од 95
Influence of Temperature on Impact Toughness of HSLA Steels
(Structural Integrity and Life, Special Issue, 2023)
The aim of this paper is to present the influence of differ-ent temperatures on the impact toughness of welded joint of high strength low-alloy steel. The results of impact tests for all three constituents of the manual ...
Verification and validation of an advanced guardedhot plate for determination of thermal conductivity
(Thermal Science 2022 Volume 26, Issue 6 Part A, Pages: 4735-4747, 2022)
The Guarded hot plate method (GHP) is a widely used technique to measure thermal conductivity of thermal insulation specimens in steady-state conditions. In this paper, an advance of GHP has been developed in the Laboratory ...
Influence of defects on limit loads and integrity of the pipeline at hydropower plant 'Pirot'
(Institut za ispitivanje materijala, Beograd, 2020)
Topic of this work is the integrity assessment of the pipeline section from hydropower plant Pirot. Crack-like defect size, maximum depth, is determined based on non-destructive evaluation - the largest crack depth is taken ...
Estimation of the drying behaviour for different clay raw materials - drying sensitivity techniques review Epitoanyang 2022
(Epitőanyag – Journal of Silicate Based and Composite Materials, 2022)
In order to rate the drying behavior of different clay raw materials it is necessary to establish
the criteria for comparison. Mineralogical composition, clay minerals content, particle size
distribution, packing, porosity, ...
Socio-Economic Analysis of the Construction and Building Materials’ Usage—Ecological Awareness in the Case of Serbia
(MDPI, 2023)
The main idea of the present study was to investigate the impact of the ongoing world
crisis on the socio-economic issues in Serbia concerning building materials usage and purchase. This research fills in the gaps in the ...
Utilization of Construction and Demolition Mix Waste in the Fired Brick Production: The Impact on Mechanical Properties
(MDPI, 2023)
The European Green Deal, which emphasizes zero-waste economies, and waste recycling
in construction and building materials, has arisen due to significant worldwide needs for solid waste recovery and usage. This ambitious ...
Assessing technological properties and environmental impact of fired bricks made by partially adding bottom ash from an industrial approach
(Elsevier Ltd, 2023)
Over the past few decades, the fired clay brick industry has searched for industrial wastes to substitute raw clay deposits and lessen their impact on the environment. Despite several investigations showing positive results, ...
Procedure for correction of bearing capacity of piles examined by the Dynamic Load Test (DLT) according to the Static Load Test (SLT)
(Structural Integrity and Life, Special Issue, 2023)
The paper shows the comparative analysis of behavior and bearing capacity of piles examined using the Dynamic Load Test (DLT) according to Static Load Test (SLT) results. The pile testing methodology is based on the existing ...
Dispersive Soils: Properties, Identification, Classification and Stabilization
(Integritet i vek konstrukcija, specijalno izdanje, 2023)
The application of dispersive soil can result in various types of damage, and even the collapse of embanked build-ings if it is not identified. Dispersive soils cannot be uniquely identified by visual identification in the ...
Determination of the effects of the rebar-cement bond parameters variation in UHPFRC using FA and ANN
(Science of Sintering 2023 OnLine-First Issue 00, 2023)
The experimental study included the design and production of ultra-high-performance steel fiber-reinforced concrete (UHPFRC). The physical and mechanical properties of UHPFRC were investigated in a laboratory setting. To ...