Претраживање
Приказ резултата 21-30 од 33
Transport and storage of heavy metals in the Sava River Basin in Serbia
(Srpsko hemijsko društvo, Beograd, 2014)
Selected heavy metals (Cu, Zn, Pb and Cd) in the water and sediment of the Sava River in Serbia were investigated from three locations in the vicinity of industrial and urban settlements (Sabac, Obrenovac and Belgrade) ...
Identification of low cycle fatigue parameters of high strength low-alloy (HSLA) steel at room temperature
(Croatian Metallurgical Soc, Zagreb, 2014)
Low cycle fatigue test was performed in ambient atmosphere at room temperature. cycle loading of material, in case of High strength low-alloy steel, entails modifications of its properties and in this paper is therefore ...
Investigation of high temperature behavior and sintering mechanism of fly ash based concretes
(Procema SA, 2014)
Four types of refractory concretes were studied at various temperatures ranging from ambient to adopted maximal 1400 degrees C. The concretes had same matrix composition: K concretes were based on corundum aggregate; B ...
Impact of choice of stabilized hysteresis loop on the end result of investigation of high-strength low-alloy (HSLA) steel on low cycle fatigue
(Croatian Metallurgical Soc, Zagreb, 2014)
High strength low-alloy steel under low cycle fatigue at a certain level of strain controlled achieve stabilized condition. During the fatigue loading stabilized hysteresis loop is determined, which typical cycle of ...
Uporedna analiza proračuna mašinskih elemenata simuliranjem kombinovanog opterećenja i odvojenim simuliranjem komponentnih opterećenja - studija slučaja / Combined load simulation vs component loads simulation in machine design: A case study
(Univerzitet u Beogradu - Mašinski fakultet, Beograd, 2014)
Na sadašnjem nivou razvoja tehnologije, u stvarnim radnim uslovima, gotovo svi mašinski elementi su opterećeni kombinovanim opterećenjima. Cilj istraživanja prikazanog u ovom radu je ukazivanje na značaj proračuna nosivosti ...
Characterisation of collapsing loess by seismic dilatometer
(Elsevier, Amsterdam, 2014)
Structural collapse and sudden volume changes represent a major geotechnical issue, particularly in loess soils. There are different criteria for assessing collapse potential based on laboratory test results, which require ...
Analysis of Moisture Transfer During the Drying of Clay Tiles with Particular Reference to an Estimation of the Time-Dependent Effective Diffusivity
(Taylor & Francis Inc, Philadelphia, 2014)
The description of the drying process was reduced to the establishment of a series of theoretical and empirical drying models. The complex processes of simultaneous moisture and heat transfer, which are often nonstationary, ...
The effects of chemical composition and firing temperature in heavy clay brick production - Chemometric approach
(Expert Fachmedien GmbH, 2014)
Factors influencing final clay brick properties are numerous, since the raw materials are highly heterogeneous. The chemometric approach is rarely used in analysis in this field, although it could significantly improve ...
Seismic Performances of the Structures at Variation of Artificial Accelerograms
(Journal of the Croatian Association of Civil Engineers, 2014)
The paper deals with the impact of changes in parameters of the artificial accelerograms on the seismic performances of structures. Thereby the seismic response and the seismic damage were analyzed. Nonlinear response of ...
The Development of Controlled Damage Mechanisms-Based Design Method for Nonlinear Static Pushover Analysis
(Facta Universitatis, Series: Architecture and Civil Engineering, 2014)
This paper presents the original method of controlled building damage mechanisms based on Nonlinear Static Pushover Analysis (NSPA-DMBD). The optimal building damage mechanism is determined based on the solution of the ...