Pretraživanje
Prikaz rezultata 61-70 od 136
Optimization of the production process through response surface method: Bricks made of loess
(Elsevier Sci Ltd, Oxford, 2013)
Loess clays are commonly used to produce bricks. Heavy clays, taken at location near Zrenjanin, Serbia, are used as a representative raw material in this study. The sample, containing about 28% of clay sized particles, is ...
Effect of LCF on behavior and microstructure of microalloyed HSLA steel and its simulated CGHAZ
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
Numerous structural components made of high strength low-alloyed steels are often exposed to low-cycle fatigue loading during their exploitation life. In order to study the fatigue behavior of one grade of structural steels ...
Effect of absorption on active pressure in floury soil
(Pleiades Publishing Inc, Moscow, 2015)
Retaining walls are often built in unsaturated soil at shallow depth above groundwater level. It is critical to define active pressure in unsaturated soil for designing retaining walls, based on the expanded theory of ...
Application of Results of Nondestructive Testing Methods in the Investigation of Microstructure of Refractory Concretes
(ASCE - American Society of Civil Engineers, 2010)
The aim of this investigation is to establish the correlation between concrete porosity, compressive mechanical strength, and microstructure using the results of nondestructive testing methods, i.e., ultrasonic pulse ...
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...
Concrete paving blocks and flags made with crushed brick as aggregate
(Construction and Building Materials, 2012)
Demolition of old buildings in urban cores has produced a large amount of waste material. Since they are mostly masonry structures the largest part of the waste material is ceramic waste. Besides that, ceramic waste is ...
Mix design and engineering properties of ultra high performance self compacting concrete
(Czech Concrete Soc-Ceska Betonarska Spolecnost Cssi, Prague 1, 2011)
The mechanical properties (compressive strength and flexural strength) were investigated under different curing conditions (standard and steam curing). Silica fumes have characteristics that make them necessary in cement ...
Influence of nanoparticles on the strength of ultra-high performance concrete
(Elsevier, 2018)
Ultra-high performance concrete (UHPC) is a modern composite material with extremely good mechanical characteristics. The application of nanoparticles in concrete is one of the possibilities for improving its properties. ...
Analytical modeling of activation procedure applied in alpha-alumina thermo-mechanical synthesis
(Elsevier Sci Ltd, Oxford, 2015)
The impact of the mechanical processing parameters on the alumina grain-size distribution affiliated characteristics and on the gamma to alpha phase transformation rate was investigated. The moderation in the alumina samples ...
Određivanje preciznosti metoda ispitivanja mehaničkih karakteristika opekarskih proizvoda i crepova od gline uporednim ispitivanjem / Determining brick and roof tile mechanical characteristics testing accuracy: Comparative investigation
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2011)
U okviru standarda SRPS ISO/IEC 17025:2006 - Opšti zahtevi za kompetentnost laboratorija za ispitivanje i laboratorija za etaloniranje, pod tačkom 5.9 postoji zahtev koji se odnosi na obezbeđenje poverenja u kvalitet ...