Претраживање
Приказ резултата 81-90 од 136
Determination of the optimal drying condition during drying of green masonry products
(ModTech Publishing House, 2012)
Explanation of the drying process is reduced to the establishment of a series theoretical and empirical drying models. Complex processes of simultaneous mass and energy transfer, which are often non-stationary and the ...
Effects of mechanical-activation and TiO2 addition on the behavior of two-step sintered steatite ceramics
(Elsevier Sci Ltd, Oxford, 2019)
Steatite, as ceramic with composition predominantly resting on magnesium silicate, was produced from economic resources - talc, aluminosilicate clays, and either BaCO3 or feldspar as flux. Titanium dioxide was a doping ...
Optimization of the production process through response surface method: Bricks made of loess
(Elsevier Sci Ltd, Oxford, 2013)
Loess clays are commonly used to produce bricks. Heavy clays, taken at location near Zrenjanin, Serbia, are used as a representative raw material in this study. The sample, containing about 28% of clay sized particles, is ...
Effect of LCF on behavior and microstructure of microalloyed HSLA steel and its simulated CGHAZ
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
Numerous structural components made of high strength low-alloyed steels are often exposed to low-cycle fatigue loading during their exploitation life. In order to study the fatigue behavior of one grade of structural steels ...
Effect of absorption on active pressure in floury soil
(Pleiades Publishing Inc, Moscow, 2015)
Retaining walls are often built in unsaturated soil at shallow depth above groundwater level. It is critical to define active pressure in unsaturated soil for designing retaining walls, based on the expanded theory of ...
Application of Results of Nondestructive Testing Methods in the Investigation of Microstructure of Refractory Concretes
(ASCE - American Society of Civil Engineers, 2010)
The aim of this investigation is to establish the correlation between concrete porosity, compressive mechanical strength, and microstructure using the results of nondestructive testing methods, i.e., ultrasonic pulse ...
Compressive Strength Improvements of Cement-Based Composites Achieved with Additional Milling of Metakaolin
(Springer, Dordrecht, 2018)
Kaolin from a Serbian deposit, having a high content of mica and quartz, disordered kaolinite and a high specific surface area, was used to prepare metakaolin (MK). The calcination at temperatures of 700 degrees C or 750 ...
Properties of the Cement-Based Composites with High Content of Metakaolin
(Springer, Dordrecht, 2018)
Environmental concerns and sustainable development require increased replacement of cement. Most of previous studies have shown that the compressive strength of cement-based composites is maximized with a 20% content of ...
Influence of modifying methods on quality of eutectic and hypereutectic silumine for diesel engine pistons
(Maney Publishing, Leeds, 2013)
The results of the investigation of the influence of different modifiers (sodium, phosphorus, antimony and strontium) on the quality of AlSi12CuMgNi and AlSi18CuMgNi alloys, which are used for the production of pistons, ...
The possibility of substitution of wear resistant low chromium white iron resistant with basalt melt
(Editura Stiintifica Fmr, Bucharest, 2012)
In this study the testing results of the possibility of substituting mill lining plates for ore milling made of low chromium white iron that is resistant to wear with plates made of basalt melt are presented. Plates made ...