Претраживање
Приказ резултата 111-120 од 131
Analysis of Redistribution of the Pile Shaft-Base Load Using the Dynamic Load Test (DLT)
(Savez građevinskih inženjera Srbije SGIS, 2021)
The paper analyses transmission and redistribution of the load from the pile on the soil, with a special focus on these effects regarding the shaft and base of the pile. The test was conducted using the dynamic load test ...
Modeling of Damping Effects in Soil – Structure Interaction in the Pushover Analysis
(1st Croatian Conference on Earthquake Engineering, Zagreb, Croatia, 2021)
The paper shows aspects of damping modelling in nonlinear static pushover analysis (NSPA) of structures through systematization of damping types and formed flow diagram, depending on the type of applied target displacement ...
Some Aspects of Pile Testing Using Static Load Test (SLT)
(Savez građevinskih inženjera Srbije SGIS, 2021)
The paper presents typical examples of pile load tests with a specific analysis of results, whereby the test methodology relies on existing ASTM standards, own knowledge and experience. The pile tests were conducted using ...
Corrosion protection of ship structures / Zaštita od korozije brodskih konstrukcija
(Udruženje inženjera Srbije za koroziju i zaštitu materijala UISKOZAM, 2021)
Hull maintenance is one of the most important aspect in ships lifetime. Ship maintenance represents
prevention of ship system failures, dealing with them and extending ships lifetime. Corrosion has
been a common cause ...
Static-Dynamic Tests of Bearing Capacity of Wind Turbine Piles
(Comptes rendus de l’Académie bulgare des Sciences, 2022)
The paper presents the static load tests (SLT) and dynamic load tests (DLT) of the piles and numerical analyses of piles in interaction with the soil of wind turbines. Pile tests were conducted using the equipment with ...
Mechanisms and morphologies of cavitation damage of NN 70 steel
(SERBIAN SOCIETY OF CORROSION AND MATERIALS PROTECTION (UISKOZAM), 2021)
Broken test tubes for low-cycle fatigue testing of Nionicral 70 (NN-70) parent material (PM) steel
and simulated heat-affected zones (SHAZ) were used to produce samples for cavitation resistance
testing. Ultrasonic ...
Some Aspects of Pile Testing Using Dynamic Load Test (DLT)
(Savez građevinskih inženjera Srbije SGIS, 2021)
The paper presents typical examples of pile load tests with a specific analysis of results, whereby the test methodology relies on existing ASTM standards, own knowledge and experience. The pile tests were conducted using ...
3D Modeling in the Function of Cavitation Demage Testing at Hydropower Plants
(Savez energetičara, 2021)
Characterization of fracture behavior of a low carbon microalloyed steel for elevated temperature application
(Twentieth Young Researchers’ Conference - Materials Science and Engineering: Programme and the Book of Abstracts, 2022)
The idea of this research was to collect data on the effect of operating temperature on the
impact toughness properties of low-carbon microalloyed steel intended for elevated
temperatures application. The aim of this ...