Претраживање
Приказ резултата 171-180 од 198
Characterization of serbian raw clay materials based on >0.63 mm sieve residues
(InterCeram: International Ceramic Review, 2009)
Particle size is the effective diameter of a particle as measured by sedimentation, sieving, or micrometric methods. Particle sizes are expressed as classes with specific, effective diameter class limits. The main classes ...
Linings based chromite for application in foundry
(ModTech Publishing House, 2012)
In this work, a possibility to develop new chromite-based refractory linings for casting applications has been examined. Lining composition optimization with the controlled reologic properties was achieved by applying ...
Update of the procedure used for heavy clay dryer optimization
(Serban Solacolu Foundation, Bucurest, 2018)
The description of the moisture transfer in porous media during drying was the subject of many scientific studies. The unique drying theory was developed five years ago and has recently won a general recognition in the ...
A Theoretical Model for Vibro-Impact Dynamics of Spur Gears with Tooth Flanks Wear
(Springer Nature, 2020)
The main performance of involute gears operation leads to the appearance of nonlinear dynamic behavior and impact. In this chapter the influence of mild wear of the tooth flanks of gears without machine finishing and surface ...
Assessment of the effect of pitting corrosion on fatigue crack initiation in hydro turbine shaft
(Trans Tech Publications Ltd, 2013)
Energy efficiency is a key issue worldwide, and not confined solely to the realm of engineers. Past failures of mechanical power system components must be examined carefully in order to minimise future occurrences and ...
The effect of mechano-chemical activation and surface treatment of limestone filler on the properties of construction composites
(Elsevier Sci Ltd, Oxford, 2017)
The effect of the combined actions of milling and hydrophobization procedures applied in construction composites synthesis was investigated. The mortars were prepared with cement (CEM I 42.5) and calcite aggregate complying ...
Application of Organic and Inorganic Wastes in Clay Brick Production: A Chemometric Approach
(Wiley Blackwell, 2016)
The goal of this study was the research on the usage capability of various industrial wastes in clay bricks. Changes in product's behavior were studied in terms of relative differences in ceramic-technological parameters ...
Network-level pavement life-cycle assessment tool
(CRC Press/Balkema, 2015)
In addition to their attempt to keep overall maintenance costs low while keeping their road networks in the appropriate condition, road agencies are facing even more demanding challenges as they incorporate effects on ...
Mathematical approach to application of industrial wastes in clay brick production - Part I: Testing and analysis
(Elsevier Sci Ltd, Oxford, 2015)
The objective of this study was to investigate utilization potential of organic and inorganic industrial wastes in clay bricks. Mineral composition of starting heavy clay sample is tested using an X-ray diffractometer. ...
Mathematical approach to application of industrial wastes in clay brick production-Part II: Optimization
(Elsevier Sci Ltd, Oxford, 2015)
The effects of organic and inorganic waste sludges, coal dust, fly and landfill ashes, soybean crust, sawdust, sunflower flakes and their ash addition to representative heavy clay were investigated. Changes introduced to ...