Pretraživanje
Prikaz rezultata 11-20 od 29
Effects of mechanical and thermal activation on pozzolanic activity of kaolin containing mica
(Elsevier Science Bv, Amsterdam, 2016)
Kaolin from a Serbian deposit, characterized by high content of impurities, such as mica and quartz, disordered kaolinite and high specific surface area, was subjected to thermal and mechanical activation on a large scale. ...
Optimization of the production process through response surface method: Bricks made of loess
(Elsevier Sci Ltd, Oxford, 2013)
Loess clays are commonly used to produce bricks. Heavy clays, taken at location near Zrenjanin, Serbia, are used as a representative raw material in this study. The sample, containing about 28% of clay sized particles, is ...
Effect of LCF on behavior and microstructure of microalloyed HSLA steel and its simulated CGHAZ
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
Numerous structural components made of high strength low-alloyed steels are often exposed to low-cycle fatigue loading during their exploitation life. In order to study the fatigue behavior of one grade of structural steels ...
ANN model of brick properties using LPNORM calculation of minerals content
(Elsevier Sci Ltd, Oxford, 2014)
Mineralogical composition of heavy clays is one of the most important properties when stadying raw materials in brick industry. Within this study, quantitative determination of minerals using LPNORM calculation was performed, ...
Mechanically activated coal ash as refractory bauxite shotcrete microfiller: Thermal interactions mechanism investigation
(Elsevier Sci Ltd, Oxford, 2014)
A growing demand for refractory castables with advanced properties has given rise to a continuous technological evolution and highlighted the necessity for secondary raw materials reapplication even in refractory industry. ...
Evidence of continuous pottery production during the late Byzantine period in the Studenica Monastery, a UNESCO World Heritage Site
(Elsevier Science Bv, Amsterdam, 2019)
A collection of 63 pottery shards excavated at the Studenica Monastery, Serbia, originating from two distinct cultural strata (late 12th until the late 13th century, and the 14th and the first half of 15th century) was ...
Removal of toxic metals from industrial sludge by fixing in brick structure
(Elsevier Sci Ltd, Oxford, 2012)
The aim of this study was to test utilization possibilities of industrial sludge in masonry industry, as well as risk of toxic elements leaching potential. Sludge is generated in a hot-dip galvanizing process after waste ...
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...
Concrete paving blocks and flags made with crushed brick as aggregate
(Construction and Building Materials, 2012)
Demolition of old buildings in urban cores has produced a large amount of waste material. Since they are mostly masonry structures the largest part of the waste material is ceramic waste. Besides that, ceramic waste is ...
Artificial fly ash based aggregates properties influence on lightweight concrete performances
(Elsevier Sci Ltd, Oxford, 2015)
The effect of the application of pelletized fly ash based aggregates obtained through different processing techniques on the behavior of lightweight concretes was analyzed. Experimental program implied production of four ...