Претраживање
Приказ резултата 11-20 од 69
Environmental Product Declaration (EPD) For Clay Roof Tiles-Case Study: Production Plant of Clay Roof Tiles in Republic of Serbia
(IOP Conference Series: Materials Science and Engineering, Volume 1196, International Conference on Resource Sustainability (ICRS 2021) 19th-23rd July 2021, Dublin, Ireland, 2021)
Environmental Product Declaration (EPD) is a standardized way of quantifying the impact of a product or system on the environment. This study evaluates the environmental impact of 1 tone of clay roof tiles, produced in ...
Finite element model for stress state analysis of deep groove ball bearings with defects
(Proceedings of the 5th International Scientific Conference, ”Conference on Mechanical Engineering Technologies and Applications” COMETa2020, East Sarajevo, 2020)
In the framework of Industry 4.0, new specific or improved methods for
monitoring and prediction of operational conditions of machine elements are required.
Ball bearings are among the elements with high impact on safety ...
The role of drainage systems in the prevention of material degradation of bridge structures
(XXIII YuCorr, Divčibare, Serbia, 2022)
The paper gives an illustrative presentation of damage to the material of bridge structures
due to failure to maintain the system for drainage of bridges. Damage is caused by mechanical
erosion and abrasion or by chemical ...
Fire protection of health facilities
(Proceedings of the the 17th International Conference on fire and explosion protection and the 7th International Scientific Conference on safety engineering – fire, environment, work environment, integrated risks, Kladovo, 2021)
Critical infrastructure can be demaged, destroyed or disrupted by deliberate acts of natural disasters,negligence, terrorism, sccidents or computer hacking, criminal activity and malicious behaviour. When it comes to the ...
European and national assessment procedure for the fire performance of facades
(Proceedings of the 19th International Symposium MASE, Ohrid, 2022, 2022)
Innovative construction systems, increasing use of combustible material in facades, less and less space between buildings, increased energy requirements; the transformation of facades in response to these changes requires ...
Examination of the physical-chemical and mechanical properties of helical cylindrical compression springs preserved in the Legacy in the Nikola Tesla Museum
(University of Belgrade - Faculty of Mechanical Engineering, Belgrade, Serbia, 2022)
The results of the scientific research work and creativity of Nikola Tesla (Smiljan, 1856 - New York, 1943), a Serbian-American scientist, engineer and inventor, represent the foundation of new technical and technological ...
Monitoring and analyzing the classical counter current industrial tunnel dryer for masonry clay units
(Proceedings of International Conference on Modern Technologies in Industrial Engineering (ModTech 2022), Iasi, Romania, 2022)
This paper goal was to increase the quality of the drying ware and to lower the drying scarp rate in one local brick factory. The registration of drying air parameters (temperature, humidity and velocity) along the dryer ...
Uniaxial compressive strength test before and after standard fire test on rock mass
(Peti simpozijum DGM (Društvo za geotehnika na Makedonija), Ohrid, Zbornik radova, 2022)
The paper presents uniaxial compressive strength test according to SRPS EN 1926. Uniaxial compressive strength test was performed on 12 identical cube-shaped specimen’s dimensions 70 mm x 70 mm x 70 mm, which are made of ...
Lime mortars containing clays for the conservation of the Danube Limes
(International Congress Chemistry for Cultural Heritage 6th ChemCH Congress, Ravenna, Italy, 2022)
The effects of alloying elements on mechanical properties of NIOMOL 490K steel
(Twentieth Young Researchers’ Conference - Materials Science and Engineering: Programme and the Book of Abstracts, 2022)
This paper is to study the effect of alloying elements on mechanical properties of highstrength
low-alloy steel, NIOMOL 490K. This steel grade belongs to the class of
molybdenum microalloyed steels, in which microalloying ...