Претраживање
Приказ резултата 11-19 од 19
A Kinetic Study of Limestone Dry Micronization in an Ultra-Centrifugal Mill with Peripheral Comminuting Path
(Goller Verlag Gmbh, Baden Baden, 2017)
Because of its physico-mechanical and physico-chemical characteristics, fine-ground (i.e. micronized) limestone is widely applied in the production of new materials. Limestone can be used as a filler, coating and/or powder ...
Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials
(Elsevier Sci Ltd, Oxford, 2017)
The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated ...
Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions
(Elsevier Sci Ltd, Oxford, 2017)
The effects of thermally (MK) or mechanically activated kaolin (AK) on the compressive strength of mortars and microstructure of pastes were investigated. Mortar mixtures, in which 10%, 20% and 30% of ordinary Portland ...
Pregled savremenih seizmičkih analiza i načina uvođenja prigušenja u njima / An overview of modern seismic analyses with different ways of damping introduction
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2017)
Autori rada su, na osnovu analize velikog broja naučnih radova, dali prikaz sopstvene originalne sistematizacije seizmičkih analiza konstrukcija, a veliki deo njih je razvijen u poslednje dve decenije. Seizmičke analize ...
The influence of tailings and cement type on durability properties of self-compacting concrete
(Univ Osijek, Tech Fac, Slavonski Brod, 2017)
In order to examine the differences in chemical composition and the possibility of using mine tailings in mortar and concrete production, samples were taken from the landfill and directly from the production. Tailings test ...
Određivanje in-situ koeficijenta trenja i imperfekcije kablova za prednaprezanje / Determination of the in situ coefficient of friction and imperfection of prestressing cables
(Društvo za ispitivanje i istraživanje materijala i konstrukcija Srbije, Beograd, 2017)
Prednaprezanjem konstruktivnih elemenata omogućava se povećavanje raspona armiranobetonskih konstrukcija. Pri projektovanju i dimenzionisanju prednapregnutih armiranobetonskih konstrukcija, neophodno je poznavanje, odnosno ...
The effect of mechano-chemical activation and surface treatment of limestone filler on the properties of construction composites
(Elsevier Sci Ltd, Oxford, 2017)
The effect of the combined actions of milling and hydrophobization procedures applied in construction composites synthesis was investigated. The mortars were prepared with cement (CEM I 42.5) and calcite aggregate complying ...
The study of thermal behavior of montmorillonite and hydromica brick clays in predicting tunnel kiln firing curve
(Elsevier Sci Ltd, Oxford, 2017)
The aim of this study was to test montmorillonite and hydromica type of brick clays by using simultaneous thermal analysis and dilatometry in an assessment of the suitability of brick clays to produce building elements. ...
Behaviour of Nionikral-70 in low-cycle fatigue
(Institut za ispitivanje materijala, Beograd, 2017)
Experimental research on the behaviour of high-strength low-alloy steel ( HSLA)exposed to low-cycle fatigue (LCF) with controlled and fully reversible strain (Delta epsilon/2 = const, R epsilon =epsilon(min)/epsilon(max) ...