Претраживање
Приказ резултата 221-229 од 229
Static-Dynamic Tests of Bearing Capacity of Wind Turbine Piles
(Comptes rendus de l’Académie bulgare des Sciences, 2022)
The paper presents the static load tests (SLT) and dynamic load tests (DLT) of the piles and numerical analyses of piles in interaction with the soil of wind turbines. Pile tests were conducted using the equipment with ...
3D Modeling in the Function of Cavitation Demage Testing at Hydropower Plants
(Savez energetičara, 2021)
Determination of the ductile-to-brittle transition temperature of NIOMOL 490 K steel welded joints
(Elsevier, 2024)
This paper is dedicated to the ductile–brittle transition behaviour of the microalloyed structural steel NIOMOL 490 K. This steel grade is used for welded pressure vessels subjected to dynamic loads and operating at sub-zero ...
Properties of concrete with crumb rubber in relation to ordinary and aerated concrete
(University of Montenegro Faculty of Civil Engineering, 2024)
Waste tires have long been a challenge for waste disposal. In an effort to mitigate the impact of solid waste on the environment and recycle it as much as possible, research has been conducted into the possibility of using ...
Corrosion Damages of Pipelines Assessment by Using the Finite Element Method
(Springer Link, 2024)
In order to ensure pipeline safety during their service life, all relevant construction, testing and safety requirements must be met. Corrosion damage is a major hazard to the steel pipeline as a whole, and it is necessary ...
Effect of temperature and specimen orientation on Charpy impact toughness
(Elsevier, 2022)
Steel grade 14MoV6 3 is used for manufacturing of boilers and steam pipelines designed for steam temperatures up to 560°C. This paper presents the experimental analysis which included impact toughness test. The analysis ...
Comparison of distributed plasticity approaches for inelastic analyisis of reinforced concrete frames
(University of Montenegro Faculty of Civil Engineering, 2024)
Following the emergence and establishment of performance-based design as a widely recognized
and applied practice, numerous significant advances in computational techniques have been
made. Arguably, nonlinear methods of ...
Raw clays in the production of ceramic and refractory tiles
(Qualicer 2024, Congress Proceedings, Castellón de la Plana, Spain, 2024)
Raw clay samples from Serbia, mainly of kaolinitic, illitic and mixed nature, were
tested for their possible application in the production of ceramics. Using various triaxial
diagrams, the samples were sorted according ...
Neutron shielding parameters of selected types of concrete
(FACULTY OF CIVIL ENGINEERING SUBOTICA, 2024)
In this scientific research, the definition of appropriate neutron shielding
parameters is presented and the results of calculations or measurements of these
parameters are presented for four selected types of concrete ...