Претраживање
Приказ резултата 31-40 од 104
Chemometric analysis of the influence of mechanical activation on the mica quality parameters
(Elsevier Sci Ltd, Oxford, 2015)
The differences in the set of the process parameters measured before and after mica mechanical activation and their influence on the grain size distribution related characteristics have been studied. The modification of ...
Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials
(Elsevier Sci Ltd, Oxford, 2017)
The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated ...
Investigation of thermally induced processes in corundum refractory concretes with addition of fly ash
(Springer, Dordrecht, 2015)
The effects that the fly ash addition has on the behavior of thermally resistant corundum concrete were discussed. Experimental program implied production of two refractory composites: "referent" concrete from 20 % of ...
Primena postupka mehaničke aktivacije u procesu pripreme neplastičnih opekarskih sirovina / Application of mechanical activation treatment within the preparation process of masonaray clay raw materials
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2011)
U radu je dat uporedni prikaz eksperimentalno utvrđenih rezultata svojstava opekarske sirovine, koja je bila pripremljena standardnim postupkom prerade i postupkom mehaničke aktivacije. Uobičajeni standardni postupak prerade ...
The influence of silica fume and curing regime on some properties of concrete
(Revista Romana de Materiale/ Romanian Journal of Materials, 2014)
The investigation of posibilities of concrete structure modification by silica fume to improve concrete properties was presented in this report. Percentage of silica fume in regard to cement varied between 0% and 20%. ...
Life extension of gears flank surfaces regenerated by hard facing
(Editura Stiintifica Fmr, Bucharest, 2013)
This paper contains the results of experimental analysis of fatigue endurance of used steel teeth regenerated by hard facing. The cylindrical spur gears were tested and compared with the newly made ones, oiler being ...
A Kinetic Study of Limestone Dry Micronization in an Ultra-Centrifugal Mill with Peripheral Comminuting Path
(Goller Verlag Gmbh, Baden Baden, 2017)
Because of its physico-mechanical and physico-chemical characteristics, fine-ground (i.e. micronized) limestone is widely applied in the production of new materials. Limestone can be used as a filler, coating and/or powder ...
Durability of concrete with different types of cement
(Procema SA, 2016)
Adequate measures must be taken during the determination of the concrete composition for ensuring the durability of concrete exposed to an aggressive environment. The influence of the cement type on the freeze/thaw resistance ...
Evidence of continuous pottery production during the late Byzantine period in the Studenica Monastery, a UNESCO World Heritage Site
(Elsevier Science Bv, Amsterdam, 2019)
A collection of 63 pottery shards excavated at the Studenica Monastery, Serbia, originating from two distinct cultural strata (late 12th until the late 13th century, and the 14th and the first half of 15th century) was ...
Removal of toxic metals from industrial sludge by fixing in brick structure
(Elsevier Sci Ltd, Oxford, 2012)
The aim of this study was to test utilization possibilities of industrial sludge in masonry industry, as well as risk of toxic elements leaching potential. Sludge is generated in a hot-dip galvanizing process after waste ...