Претраживање
Приказ резултата 41-50 од 51
Identification of low cycle fatigue parameters of high strength low-alloy (HSLA) steel at room temperature
(Croatian Metallurgical Soc, Zagreb, 2014)
Low cycle fatigue test was performed in ambient atmosphere at room temperature. cycle loading of material, in case of High strength low-alloy steel, entails modifications of its properties and in this paper is therefore ...
Assessment of intensive grinding effects on alumina as refractory compound: Acceleration of gamma to alpha phase transformation mechanism
(Elsevier Sci Ltd, Oxford, 2014)
In this study, the feasibility of alumina phase transition enhancement by mechanical activation was conducted. It was showed that the milling environment plays an important role on the physical, chemical and thermal behavior ...
Impact of choice of stabilized hysteresis loop on the end result of investigation of high-strength low-alloy (HSLA) steel on low cycle fatigue
(Croatian Metallurgical Soc, Zagreb, 2014)
High strength low-alloy steel under low cycle fatigue at a certain level of strain controlled achieve stabilized condition. During the fatigue loading stabilized hysteresis loop is determined, which typical cycle of ...
Prediction and Optimization of Heavy Clay Products Quality
(Wiley Blackwell, 2014)
The effects of chemical composition, firing temperature (800-1100 °C), and several shape formats of laboratory brick samples on the final product quality were investigated. Prediction of the final laboratory products ...
Natural, modified and saturated zeolites as additives in Portland cement
(Bauverlag Bv Gmbh, Gutersloh, 2014)
Comparative analysis of process parameters of talc mechanical activation in centrifugal and attrition mill
(Oficyna Wydawnicza Politechniki Wroclawskiej, Wroclaw, 2014)
The efficiency of talc mechanical activation by means of two different mechano-activators centrifugal and attrition mill is investigated in this study and the comparative analysis of the characteristics of obtained talc ...
Mechanical Activation as Sintering Pre-treatment of Talc for Steatite Ceramics
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
The effect of vibratory mill induced mechanical activation on the change of the particle size, crystallinity and the phase transformations of the minerals present in the activated material, was studied with the purpose of ...
Low cycle fatigue of weldments produced of a high strength low alloyed steel
(Elsevier Science Bv, Amsterdam, 2014)
A quenched and tempered high strength low alloy steel NIONIKRAL 70 for producing welded pressure vessels, where high resistance to fatigue crack propagation and high tolerance of damage are of high importance, has been ...
NDT and RBI in function of pressure equipment integrity loss
(Univerzitet u Novom Sadu, Građevinski fakultet Subotica, Srbija, 2014)