Претраживање
Приказ резултата 41-50 од 67
Overview of the new rulebook on testing fire resistance, external fire performances and reaction to fire in the Republic of Serbia
(THE 8th INTERNATIONAL CONFERENCE "CIVIL ENGINEERING – SCIENCE AND PRACTICE", GNP 2022, Proceedings, 2022)
The growing expansion of construction and import of new, as well as existing materials from around the world, has led to a large number of tests materials and elements of constructions in the Republic of Serbia. Most of ...
Novel and rapid drying characterization test suitable for The brick and tile industry
(International Journal of Modern Manufacturing Technologies, 2022)
The industrial raw material compositions in brick
or tile production are normally adapting from time to time
with novel clays. The proper raw material change must be
based on the reliable raw material characterization ...
Influence of water/cement ratio on the properties of fresh SCC with fly ash addition
(Proceeding of the 8th International Conference "Civil engineering-science and practice" -GNP 2022, 2022)
Self-compacting concrete (SCC) exhibits increased flowability in comparison with the conventional vibrated concrete. This is most often achieved through the incorporation of high amounts of extra-fine particles (i.e. mineral ...
Put do prve srpske tehničke ocene za portland-kompozitni cement sa smanjenim sadržajem klinkera
(XXVIII kongres DIMK i IX kongres SIGP sa i međunarodnim simpozijumom o istraživanjima i primeni savremenih dostignuća u građevinarstvu u oblasti materijala i konstrukcija, Divčibare, Srbija, 2022)
Uniaxial compressive strength test before and after standard fire test on rock mass
(Peti simpozijum DGM (Društvo za geotehnika na Makedonija), Ohrid, Zbornik radova, 2022)
The paper presents uniaxial compressive strength test according to SRPS EN 1926. Uniaxial compressive strength test was performed on 12 identical cube-shaped specimen’s dimensions 70 mm x 70 mm x 70 mm, which are made of ...
Monitoring and analyzing the classical counter current industrial tunnel dryer for masonry clay units
(Proceedings of International Conference on Modern Technologies in Industrial Engineering (ModTech 2022), Iasi, Romania, 2022)
This paper goal was to increase the quality of the drying ware and to lower the drying scarp rate in one local brick factory. The registration of drying air parameters (temperature, humidity and velocity) along the dryer ...
Characterization of fracture behavior of a low carbon microalloyed steel for elevated temperature application
(Twentieth Young Researchers’ Conference - Materials Science and Engineering: Programme and the Book of Abstracts, 2022)
The idea of this research was to collect data on the effect of operating temperature on the
impact toughness properties of low-carbon microalloyed steel intended for elevated
temperatures application. The aim of this ...
Effects of Maintaining a Building Constructed in the IMS System (Žeželj) with an Approximate Analysis of Hydrodynamical Shock and the Analogy with Lateral Soil Expansion with Cavern Effects During Liquefaction
(Assessment of the Condition, Maintenance and Rehabilitation of Buildings and Settlements, 12th International Conference, Vrnjacka Banja, Serbia, Proceedings, 2022)
The paper indicates the problems of maintaining buildings constructed in the IMS system, founded on piles with a basement floor. Also presented are the problems with the installations of buildings with a roof terrace, such ...
Comparative Analysis of Bearing Capacity of Piles Tested by Dynamic Load Test (DLT) and Pressuremeter Test (PMT)
(5th symposium of the Macedonian Association for Geotechnics, Ohrid, Macedonia, Proceedings, 2022)
The paper presents the comparative analysis of several piles for different pier locations of a bridge by employing in-situ deep foundations tests and in-situ soil tests. The focus of the paper is on the
presentation of ...
Determining of the Fatigue Crack Growth Rate of HSLA Steel at Room Temperature
(Advanced Technologies & Materials, 2022)
Welded joint is a critical region of a welded structure and fracture mechanics analysis is inevitable
in the structural integrity assessment of all welded structures. This paper shows the determining of
parameters of the ...