Претраживање
Приказ резултата 1-10 од 17
Fired pressed pellet as a sample preparation technique of choice for an energy dispersive X-ray fluorescence analysis of raw clays
(Elsevier, 2022)
In this paper, the main subject concerns comparing different techniques to prepare raw clay samples for energy dispersive X-ray fluorescence spectrometry (EDXRF). Three kinds of sample preparation procedures are examined,such ...
Structure and properties of ZnO/ZnMn2O4 composite obtained by thermal decomposition of terephthalate precursor
(Journal of the Serbian Chemical Society - JSCS, 2022)
A biphasic [Mn(dipya)(H2O)4](tpht)/{[Zn(dipya)(tpht)]·H2O}n complex material, I, (dipya = 2,2’-dipyridylamine, tpht2– = dianion of terephthalatic acid) was synthesized by ligand exchange reaction and characterized by XRPD ...
Aplitic Granite Waste as Raw Material for the Production of Outdoor Ceramic Floor Tiles
(MDPI, 2022)
One of the significant problems in the production of ceramic tiles is the very high consump-tion of natural resources such as clay, feldspar, and quartz. The possibility of replacing part of the formulation of ceramic ...
Verification and validation of an advanced guardedhot plate for determination of thermal conductivity
(Thermal Science 2022 Volume 26, Issue 6 Part A, Pages: 4735-4747, 2022)
The Guarded hot plate method (GHP) is a widely used technique to measure thermal conductivity of thermal insulation specimens in steady-state conditions. In this paper, an advance of GHP has been developed in the Laboratory ...
Estimation of the drying behaviour for different clay raw materials - drying sensitivity techniques review Epitoanyang 2022
(Epitőanyag – Journal of Silicate Based and Composite Materials, 2022)
In order to rate the drying behavior of different clay raw materials it is necessary to establish
the criteria for comparison. Mineralogical composition, clay minerals content, particle size
distribution, packing, porosity, ...
Evaluation of Inverted-Pendulum-with-Rigid-Legs Walking Locomotion Models for Civil Engineering Applications
(MDPI, 2022)
Bipedal models for walkers, originally developed in the research field of biomechanics,
have been identified as potential candidates for modelling pedestrians in structural engineering
applications. These models provide ...
Raw kaolinitic–illitic clays as high‑mechanical‑performance hydraulically pressed refractories
(Journal of Thermal Analysis and Calorimetry, 2022)
The usage possibility of 19 composites of raw refractory clays from Serbia containing approximately 53.29% of SiO2 and 26.73% of Al2O3 is presented. The sum of fluxing oxides was 57.74%, while these materials contained 32% ...
Analysis of the influence of pre-treatment with liquid hot water (LHW) on the chemical composition of wooden chips / Analiza uticaja predtretmana vrelom vodom (LHW) na hemijski sastav drvnog iverja
(Advanced Technologies 2022, vol. 11, 2, 40-47, 2022)
The goal of this paper is to analyze the chemical composition of untreated and
treated wooden chips from the native narrow-leaved ash (Fraxinus angustifolia
Vahl. ssp. Pannonica Soó & Simon). In order to determine the ...
Determining of the Fatigue Crack Growth Rate of HSLA Steel at Room Temperature
(Advanced Technologies & Materials, 2022)
Welded joint is a critical region of a welded structure and fracture mechanics analysis is inevitable
in the structural integrity assessment of all welded structures. This paper shows the determining of
parameters of the ...
Damage occurrence in welded structures of the bucket-wheel boom
(Trans Tech Publications Ltd, Switzerland, 2022)
Causes of damage occurrence in vital components of welded structures of the bucket-wheel
excavator boom (DU1) at the coal landfill of the thermal power plant 'Nikola Tesla A' in Obrenovac
(Serbia) are investigated. ...