Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints
Autori
Maksimović, AnaMilović, Ljubica
Zečević, Bojana
Đorđević, Branislav
Bulatović, Srđan
Aleksić, Vujadin
Konferencijski prilog (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
This paper is devoted to the ductile–brittle transition behavior of high strength low alloyed structural steel NIOMOL 490K. This steel grade is designed for welded pressure vessels exposed to dynamic loads, operating at temperatures below zero, and that is why it must have acceptable toughness. Due to its importance for the safety assessment of pressure vessels, a characterization of this steel with Charpy V-notch test in range of temperature between-60 ⁰C and +60 ⁰C was undertaken. Ductile-to-brittle transition temperature curves were generated in the present study by using instrumented Charpy pendulum impact test on V-notch specimens. Notches were located in the parent material, heat-affected zone and weld metal. The nil-ductility temperature and tensile properties in temperature range from -60 ⁰C to +60 ⁰C are presented in this paper. We used different test temperatures to better understand ductile-to brittle transition response than just use either Charpy energy or other related du...ctility criteria.
Ključne reči:
Transition temperature / Mechanical properties / Niomol 490KIzvor:
Procedia Structural Integrity, 2022, 42, 1361-1368Izdavač:
- Elsevier B.V.
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200135 (Univerzitet u Beogradu, Tehnološko-metalurški fakultet) (RS-MESTD-inst-2020-200135)
DOI: 10.1016/j.prostr.2022.12.173
ISBN: 978-171387030-2
ISSN: 2452-3216
Scopus: 2-s2.0-85158920296
Institucija/grupa
Institut za ispitivanje materijalaTY - CONF AU - Maksimović, Ana AU - Milović, Ljubica AU - Zečević, Bojana AU - Đorđević, Branislav AU - Bulatović, Srđan AU - Aleksić, Vujadin PY - 2022 UR - http://rims.institutims.rs/handle/123456789/734 AB - This paper is devoted to the ductile–brittle transition behavior of high strength low alloyed structural steel NIOMOL 490K. This steel grade is designed for welded pressure vessels exposed to dynamic loads, operating at temperatures below zero, and that is why it must have acceptable toughness. Due to its importance for the safety assessment of pressure vessels, a characterization of this steel with Charpy V-notch test in range of temperature between-60 ⁰C and +60 ⁰C was undertaken. Ductile-to-brittle transition temperature curves were generated in the present study by using instrumented Charpy pendulum impact test on V-notch specimens. Notches were located in the parent material, heat-affected zone and weld metal. The nil-ductility temperature and tensile properties in temperature range from -60 ⁰C to +60 ⁰C are presented in this paper. We used different test temperatures to better understand ductile-to brittle transition response than just use either Charpy energy or other related ductility criteria. PB - Elsevier B.V. C3 - Procedia Structural Integrity T1 - Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints EP - 1368 SP - 1361 VL - 42 DO - 10.1016/j.prostr.2022.12.173 ER -
@conference{ author = "Maksimović, Ana and Milović, Ljubica and Zečević, Bojana and Đorđević, Branislav and Bulatović, Srđan and Aleksić, Vujadin", year = "2022", abstract = "This paper is devoted to the ductile–brittle transition behavior of high strength low alloyed structural steel NIOMOL 490K. This steel grade is designed for welded pressure vessels exposed to dynamic loads, operating at temperatures below zero, and that is why it must have acceptable toughness. Due to its importance for the safety assessment of pressure vessels, a characterization of this steel with Charpy V-notch test in range of temperature between-60 ⁰C and +60 ⁰C was undertaken. Ductile-to-brittle transition temperature curves were generated in the present study by using instrumented Charpy pendulum impact test on V-notch specimens. Notches were located in the parent material, heat-affected zone and weld metal. The nil-ductility temperature and tensile properties in temperature range from -60 ⁰C to +60 ⁰C are presented in this paper. We used different test temperatures to better understand ductile-to brittle transition response than just use either Charpy energy or other related ductility criteria.", publisher = "Elsevier B.V.", journal = "Procedia Structural Integrity", title = "Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints", pages = "1368-1361", volume = "42", doi = "10.1016/j.prostr.2022.12.173" }
Maksimović, A., Milović, L., Zečević, B., Đorđević, B., Bulatović, S.,& Aleksić, V.. (2022). Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints. in Procedia Structural Integrity Elsevier B.V.., 42, 1361-1368. https://doi.org/10.1016/j.prostr.2022.12.173
Maksimović A, Milović L, Zečević B, Đorđević B, Bulatović S, Aleksić V. Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints. in Procedia Structural Integrity. 2022;42:1361-1368. doi:10.1016/j.prostr.2022.12.173 .
Maksimović, Ana, Milović, Ljubica, Zečević, Bojana, Đorđević, Branislav, Bulatović, Srđan, Aleksić, Vujadin, "Determination of ductile-to-brittle transition temperature of NIOMOL 490K steel welded joints" in Procedia Structural Integrity, 42 (2022):1361-1368, https://doi.org/10.1016/j.prostr.2022.12.173 . .