Search
Now showing items 1-10 of 28
Influence of drying constant adn diffusivity of clay drying behavior
(Industrial Ceramics, 2007)
The influence of the correlation between the drying constant and the diffusion coefficient of the liquid on the behavior of two raw materials for brick manufacturing during their drying process was examined. The test was ...
New possibilities of application of cordierite ceramics
(Silicates Industriels, 2009)
Cordierite ceramics have an important role in modem technology. Standard raw materials, kaolinite, tale, magnesia, alumina were used in synthesis of cordierite ceramics. Composition of cordierite ceramics is 2MgO-2Al 2O ...
Structural Integrity Assessment of Welded Pressure Vessel Produced of HSLA Steel
(Journal Iron Steel Research Editorial Board, Beijing, 2011)
Welded joint is a critical region of a welded structure. The operational safety of welded pressure equipment mostly depends on the behaviour of loaded weldments. Safety of welded structure is dependent on the properties ...
The influence of silica fume and curing regime on some properties of concrete
(Revista Romana de Materiale/ Romanian Journal of Materials, 2014)
The investigation of posibilities of concrete structure modification by silica fume to improve concrete properties was presented in this report. Percentage of silica fume in regard to cement varied between 0% and 20%. ...
Life extension of gears flank surfaces regenerated by hard facing
(Editura Stiintifica Fmr, Bucharest, 2013)
This paper contains the results of experimental analysis of fatigue endurance of used steel teeth regenerated by hard facing. The cylindrical spur gears were tested and compared with the newly made ones, oiler being ...
Influence of increased temperature on clay fast drying process
(Revista Romana de Materiale/ Romanian Journal of Materials, 2009)
In this paper are presented testing results during process of fast drying at conditions of increased temperature. Three different masonry raw materials were examined using recircular laboratory dryer with air recirculation. ...
Durability of concrete with different types of cement
(Procema SA, 2016)
Adequate measures must be taken during the determination of the concrete composition for ensuring the durability of concrete exposed to an aggressive environment. The influence of the cement type on the freeze/thaw resistance ...
Investigation of high temperature behavior and sintering mechanism of fly ash based concretes
(Procema SA, 2014)
Four types of refractory concretes were studied at various temperatures ranging from ambient to adopted maximal 1400 degrees C. The concretes had same matrix composition: K concretes were based on corundum aggregate; B ...
High-temperature concrete binders based on fly ash
(Revista Romana de Materiale/ Romanian Journal of Materials, 2013)
High-temperature concrete binders in which fly ash, as environmentally harmful secondary raw material, is combined with masonry and refractory cement is a new option for reapplication of this coal combustion by-product. ...
Process parameters influence on microstructural properties of hypereutectic al-18wt% Si alloys obtained by rheocasting process
(Editura Stiintifica Fmr, Bucharest, 2012)
Hypereutectic Al-18wt%Si alloy was obtained by conventional and rheocasting procedure at cooling rate 0.16 +/- 0.05 degrees Cs-1. Samples of rheocasted alloy were obtained at two stirring speeds 1000 and 1500 rpm. Tests ...