Претраживање
Приказ резултата 81-90 од 272
Chemometric Analysis of Alternations in Coal Ash Quality Induced by Application of Different Mechano-chemical Processing Parameters
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
The coal fly ash mechano-chemical activation conducted via high energy ultra-centrifugal mill was optimized using mathematical and statistical tools. The aim of the investigation was to accent the merits of alternations ...
Analiza uticaja sučeono zavarenih spojeva na nosivost konstrukcije rezervoara / Analysis of the effects of butt welded joints on a carrying capacity of a structure tank
(Inženjersko društvo za koroziju, Beograd, 2017)
U radu je posle proračuna metodom konačnih elemenata (MKE) analizirana raspodela napona na modelu dela oplate rezervoara pod pritiskom bez zavarenih spojeva (ZS), sa obimnim ZS, podužnim ZS i ukrsnim mestom ZS. Takođe, u ...
Cracking resistance of AlMg4.5Mn alloy TIG welded joints
(Institut za ispitivanje materijala, Beograd, 2011)
In this paper the AlMg4.5Mn TIG welded joints have been tested in order to investigate their cracking resistance. Testing plates, size of 500×250×12 mm, are welded by TIG procedure in a horizontal-vertical position. Various ...
Electro-filter ash use in the underground coal mines
(Institut za rudarstvo i metalurgiju, Bor, 2017)
Thermal power plants in the Republic of Serbia spend 35-40 million tons of coal annually, mostly lignite, with about 6 million tons of ash or slag as a by-product of electricity and heat production, deposited on the ...
Premazi na bazi cirkona sa primenom u Lost Foam procesu livenja / Zircon-based coating for the applications in Lost Foam casting process
(Savez hemijskih inženjera, Beograd, 2012)
U ovom radu je istraživana mogućnost dobijanja novih vatrostalnih premaza na bazi cirkona koji bi imali primenu u livarstvu. Optimizacija sastava premaza kontrolisana reološkim svojstvima postignuta je primenom različitih ...
Failure of steam line causes determined by NDT testing in power and heating plants
(Gruppo Italiano Frattura, 2013)
This paper examines leakage and damages of steam and provides an overview of NDT testing in order to determine the cause of steam lines failure in power plants and heating plants. This approach may be applied to similar ...
Specific features of stainless steel compression elements
(Croatian Soc Civil Engineers-Hsgi, Zagreb, 2015)
Stainless steel has a number of features that define different behaviour of structural elements made of this material, as related to equivalent carbon steel elements. These properties, especially prominent in case of ...
Microstructure and Phase Composition Of Steatite Ceramics Sintered by Traditional and Spark Plasma Sintering
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2018)
The influence of the sintering method on the mineral phase transformations and development of the crystalline microstructure of steatite ceramics was investigated. The steatite samples were fabricated from talc and bentonite ...
Mechanical Activation as Sintering Pre-treatment of Talc for Steatite Ceramics
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2014)
The effect of vibratory mill induced mechanical activation on the change of the particle size, crystallinity and the phase transformations of the minerals present in the activated material, was studied with the purpose of ...
Methodological procedure for selection the type and construction of self-propelled hydraulic support for coal excavation on the example of the coal deposit 'Poljana'
(Institut za rudarstvo i metalurgiju, Bor, 2018)
For the application of a wide forehead method, decisive is an assessment, respectively, selection of the type and construction of self-propelled hydraulic support, both for horizontal and vertical excavation concentrations. ...