Pretraživanje
Prikaz rezultata 11-20 od 58
Characterization of New Structure for Silicon Carbide X-Ray Detector by Method Monte Carlo
(Polish Acad Sciences Inst Physics, Warsaw, 2011)
This work presents a characterization of radiation absorption properties of silicon carbide (SiC) as semiconductor for the realization of detectors for X-rays. SiC detectors can potentially reach superior performance with ...
Determination of the apparent porosity level of refractory concrete during a sintering process using an ultrasonic pulse velocity technique and image analysis
(Savez hemijskih inženjera, Beograd, 2010)
Concrete which undergoes a thermal treatment before (pre-casted concrete blocks) and during (concrete embedded in-situ) its life-service can be applied in plants operating at high temperature and as thermal insulation. ...
Dobijanje metakaolina termičkim tretmanom kaolinske gline / Thermal treatment of kaolin clay to obtain metakaolin
(Savez hemijskih inženjera, Beograd, 2010)
U radu su prikazani rezultati istraživanja dobijanja metakaolina termičkim tretmanom domaće kaolinske gline. Polazna sirovina je bila kaolinska glina sa ležišta Vrbica (Aranđelovački basen), čiji je sadržaj kaolinita oko ...
Structural Integrity Assessment of Welded Pressure Vessel Produced of HSLA Steel
(Journal Iron Steel Research Editorial Board, Beijing, 2011)
Welded joint is a critical region of a welded structure. The operational safety of welded pressure equipment mostly depends on the behaviour of loaded weldments. Safety of welded structure is dependent on the properties ...
The influence of silica fume and curing regime on some properties of concrete
(Revista Romana de Materiale/ Romanian Journal of Materials, 2014)
The investigation of posibilities of concrete structure modification by silica fume to improve concrete properties was presented in this report. Percentage of silica fume in regard to cement varied between 0% and 20%. ...
Transport and storage of heavy metals in the Sava River Basin in Serbia
(Srpsko hemijsko društvo, Beograd, 2014)
Selected heavy metals (Cu, Zn, Pb and Cd) in the water and sediment of the Sava River in Serbia were investigated from three locations in the vicinity of industrial and urban settlements (Sabac, Obrenovac and Belgrade) ...
Comparison of refractory coatings based on talc, cordierite, zircon and mullite fillers for lost-foam casting
(Inst Za Kovinske Materiale I In Tehnologie, Ljubjana, 2015)
This study presents the results of an investigation of high-temperature materials refractory coatings based on different refractory fillers including talc, cordierite, zircon and mullite applied in the lost-foam casting ...
Investigation of high temperature behavior and sintering mechanism of fly ash based concretes
(Procema SA, 2014)
Four types of refractory concretes were studied at various temperatures ranging from ambient to adopted maximal 1400 degrees C. The concretes had same matrix composition: K concretes were based on corundum aggregate; B ...
Need to Improve the Natural Aggregate Resources Supply in the City of Belgrade (Serbia)
(Berg Fac Technical Univ Kosice, Kosice, 2016)
The City of Belgrade is the largest market for aggregates in Serbia but the production of natural aggregates is rather small, around five percent of total consumption. This reflects the geology of the City of Belgrade ...
Synthesis and sintering of high-temperature composites based on mechanically activated fly ash
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2012)
Količina letećeg pepela koji se proizvodi i koja će biti proizvedena u godinama koje dolaze zahteva razvoj novih metoda recikliranja u kojima će biti upotrebljene značajne količine ovog otpadnog materijala. Mogućnost ...