Pretraživanje
Prikaz rezultata 11-20 od 70
Synthesis and sintering of high-temperature composites based on mechanically activated fly ash
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2012)
Količina letećeg pepela koji se proizvodi i koja će biti proizvedena u godinama koje dolaze zahteva razvoj novih metoda recikliranja u kojima će biti upotrebljene značajne količine ovog otpadnog materijala. Mogućnost ...
The influence of silica fume and curing regime on some properties of concrete
(Revista Romana de Materiale/ Romanian Journal of Materials, 2014)
The investigation of posibilities of concrete structure modification by silica fume to improve concrete properties was presented in this report. Percentage of silica fume in regard to cement varied between 0% and 20%. ...
Life extension of gears flank surfaces regenerated by hard facing
(Editura Stiintifica Fmr, Bucharest, 2013)
This paper contains the results of experimental analysis of fatigue endurance of used steel teeth regenerated by hard facing. The cylindrical spur gears were tested and compared with the newly made ones, oiler being ...
Influence of increased temperature on clay fast drying process
(Revista Romana de Materiale/ Romanian Journal of Materials, 2009)
In this paper are presented testing results during process of fast drying at conditions of increased temperature. Three different masonry raw materials were examined using recircular laboratory dryer with air recirculation. ...
The Chemometric Study of Limestone Physico-chemical Properties and Thermal Behavior for Application in Construction Composites
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
The limestone, as an economically sustainable and easily available basic raw material, is frequently utilized in the building industry for resolving of the environmental protection issues. The limestone is incorporated in ...
Sintering of Fly Ash Based Composites with Zeolite and Bentonite Addition for Application in Construction Materials
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
Due to pozzolanic characteristics, fly ash is commonly used as a cement replacement in construction composites. Addition of natural clays with sorption ability (i.e. zeolite and bentonite) in to the fly ash based construction ...
Possibility of using bottom ash in precast concrete products
(Croatian Soc Civil Engineers-Hsgi, Zagreb, 2018)
Chemical, physical and mechanical properties of bottom ash from two thermal power plants were analysed in order to evaluate the quality of bottom ash and to determine the possibility of its use in composite materials. It ...
Durability of concrete with different types of cement
(Procema SA, 2016)
Adequate measures must be taken during the determination of the concrete composition for ensuring the durability of concrete exposed to an aggressive environment. The influence of the cement type on the freeze/thaw resistance ...
Investigation of high temperature behavior and sintering mechanism of fly ash based concretes
(Procema SA, 2014)
Four types of refractory concretes were studied at various temperatures ranging from ambient to adopted maximal 1400 degrees C. The concretes had same matrix composition: K concretes were based on corundum aggregate; B ...
Need to Improve the Natural Aggregate Resources Supply in the City of Belgrade (Serbia)
(Berg Fac Technical Univ Kosice, Kosice, 2016)
The City of Belgrade is the largest market for aggregates in Serbia but the production of natural aggregates is rather small, around five percent of total consumption. This reflects the geology of the City of Belgrade ...