Pretraživanje
Prikaz rezultata 1-10 od 104
Assessment of intensive grinding effects on alumina as refractory compound: Acceleration of gamma to alpha phase transformation mechanism
(Elsevier Sci Ltd, Oxford, 2014)
In this study, the feasibility of alumina phase transition enhancement by mechanical activation was conducted. It was showed that the milling environment plays an important role on the physical, chemical and thermal behavior ...
Comprehensive approach to the influence of frequently used secondary raw materials on clay bricks quality using mathematical modeling (a systematic review)
(Elsevier Sci Ltd, Oxford, 2018)
The main idea of this research was to evaluate rice and sunflower hulls, sawdust and their ashes, as additives in clay brick production using mathematical analysis. All available papers, containing the parameters of interest, ...
Structural Integrity Assessment of Welded Pressure Vessel Produced of HSLA Steel
(Journal Iron Steel Research Editorial Board, Beijing, 2011)
Welded joint is a critical region of a welded structure. The operational safety of welded pressure equipment mostly depends on the behaviour of loaded weldments. Safety of welded structure is dependent on the properties ...
Influence of different bonding and fluxing agents on the sintering behavior and dielectric properties of steatite ceramic materials
(Elsevier Sci Ltd, Oxford, 2017)
The focus of the study was on providing insights into interconnections between sintering and development of the crystalline microstructure, and consequently variations in dielectric behavior of four steatites fabricated ...
Study on the addition effect of metakaolin and mechanically activated kaolin on cement strength and microstructure under different curing conditions
(Elsevier Sci Ltd, Oxford, 2017)
The effects of thermally (MK) or mechanically activated kaolin (AK) on the compressive strength of mortars and microstructure of pastes were investigated. Mortar mixtures, in which 10%, 20% and 30% of ordinary Portland ...
Mechanically activated coal ash as refractory bauxite shotcrete microfiller: Thermal interactions mechanism investigation
(Elsevier Sci Ltd, Oxford, 2014)
A growing demand for refractory castables with advanced properties has given rise to a continuous technological evolution and highlighted the necessity for secondary raw materials reapplication even in refractory industry. ...
The influence of nano-silica and barite aggregate on properties of ultra high performance concrete
(Elsevier Sci Ltd, Oxford, 2016)
The development of building materials with improved characteristics and their application for increasing structure durability and sustainability is one of the goals in construction sector. The main objective of this paper ...
Methodological approach to recovery of the cracks on the turbine-shaft at hydroelectric power plant djerdap II
(Springer Netherlands, 2013)
In present paper, the methodological approach to analysis of the causes of failures and recovery of the damages has been presented using the example of the damage of the turbine-shafts construction. This approach can be ...
Određivanje koeficijenta prenosa toplote prilikom sušenja opekarskih proizvoda / Determination of the heat transfer coefficient during drying of heavy clay products
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2011)
Određivanje koeficijenata prenosa toplote prilikom sušenja opekarskih proizvoda izvršena su na uzorcima pločica od gline sa lokaliteta 'Banatski Karlovac' dimenzija (120 x 50 x 14 mm). Ispitivanja su sprovedena u laboratorijskoj ...
Nova ispitna metoda e za ispitivanje otpornosti prema mrazu crepova od gline - EN 539-2: 2009 / New testing method e for frost resistance determination of roofling clay tiles according to standard EN 539-2: 2009
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2011)
Ispitne metode za određivanje otpornosti crepova od gline prikazane u novom evropskom standardu EN 539-2 iz 2009 se veoma malo razlikuju od ispitnih metoda u postojećem važećem standardu EN 539-2 iz 2005 godine, sa izuzetkom ...