Претраживање
Приказ резултата 31-40 од 104
Chemometric assessment of mechano-chemically activated zeolites for application in the construction composites
(Elsevier Sci Ltd, Oxford, 2017)
Natural zeolites of clinoptilolite type from seven deposits were submitted to mechano-chemical activation in a Retsch ultra -centrifugal mill. The zeolite types and activation parameters were altered during the experiment ...
The effect of alternations in mineral additives (zeolite, bentonite, fly ash) on physico-chemical behavior of Portland cement based binders
(Elsevier Sci Ltd, Oxford, 2018)
Instrumental analyses accompanied by analytical modeling tools were employed to assess physico-chemical changes induced by variations in chemical composition of cementitious composites, i.e. mortar binders. Coal combustion ...
Validation of energy-dispersive X-ray fluorescence procedure for determination of major and trace elements present in the cement based composites
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
Adjustment and subsequent validation of energy-dispersive X-ray fluorescence (ED-XRF) method for cement based binders with addition of mineral raw materials (fly ash, zeolite and bentonite) was conducted. Eighteen chemical ...
Chemometric analysis of the influence of mechanical activation on the mica quality parameters
(Elsevier Sci Ltd, Oxford, 2015)
The differences in the set of the process parameters measured before and after mica mechanical activation and their influence on the grain size distribution related characteristics have been studied. The modification of ...
High-temperature concrete binders based on fly ash
(Revista Romana de Materiale/ Romanian Journal of Materials, 2013)
High-temperature concrete binders in which fly ash, as environmentally harmful secondary raw material, is combined with masonry and refractory cement is a new option for reapplication of this coal combustion by-product. ...
Geopolimeri na bazi alkalno aktiviranog elektrofilterskog pepela kao novo vezivo u betonu / Alkali activated fly ash geopolymers as a new binder in concrete
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2013)
U skladu sa rastućom brigom za zaštitu životne sredine i potrebom razvoja održivog građevinarstva, javlja se i veće interesovanje za istraživanja u oblasti novih materijala, koji će koristiti otpadne sirovine i imati manji ...
Process parameters influence on microstructural properties of hypereutectic al-18wt% Si alloys obtained by rheocasting process
(Editura Stiintifica Fmr, Bucharest, 2012)
Hypereutectic Al-18wt%Si alloy was obtained by conventional and rheocasting procedure at cooling rate 0.16 +/- 0.05 degrees Cs-1. Samples of rheocasted alloy were obtained at two stirring speeds 1000 and 1500 rpm. Tests ...
Evaluation of Lignite Fly Ash for Utilization as Component in Construction Materials
(Taylor & Francis Inc, Philadelphia, 2013)
Utilization potential of fly ash, as the main residue in the lignite coal combustion in Serbian power plants, was investigated in present study. High production of fly ash represents extreme hazard for environment. Question ...
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...
Concrete paving blocks and flags made with crushed brick as aggregate
(Construction and Building Materials, 2012)
Demolition of old buildings in urban cores has produced a large amount of waste material. Since they are mostly masonry structures the largest part of the waste material is ceramic waste. Besides that, ceramic waste is ...