Претраживање
Приказ резултата 11-20 од 136
Explicit parametric method for optimal spur gear tooth profile definition
(Trans Tech Publications Ltd, 2013)
The gear tooth profile has an immense effect on the main operating parameters of gear pairs (load capacity, working life, efficiency, vibrations, etc). In current engineering research and practice, there is a strong need ...
The influence of corrosion on stress concentration factor at shaft to flange radius
(Springer Netherlands, 2013)
This paper describes the influence of corrosion on stress concentration factor and crack initiation at shaft-flange transition section. The real turbine shaft failure case study is used for research. This case study and ...
Prediction of crack initiation in spur gear contact zone
(Univ Novi Sad, Fac Tech Sci, Adeko, Novi Sad, 2012)
The objective of this paper is to give a new viewpoint in contact fatigue prediction in the case of high-cycle fatigue. The presented research is based on up-to-date methods and multidisciplinary approach, and enables ...
Chemometric assessment of mechano-chemically activated zeolites for application in the construction composites
(Elsevier Sci Ltd, Oxford, 2017)
Natural zeolites of clinoptilolite type from seven deposits were submitted to mechano-chemical activation in a Retsch ultra -centrifugal mill. The zeolite types and activation parameters were altered during the experiment ...
The effect of alternations in mineral additives (zeolite, bentonite, fly ash) on physico-chemical behavior of Portland cement based binders
(Elsevier Sci Ltd, Oxford, 2018)
Instrumental analyses accompanied by analytical modeling tools were employed to assess physico-chemical changes induced by variations in chemical composition of cementitious composites, i.e. mortar binders. Coal combustion ...
Validation of energy-dispersive X-ray fluorescence procedure for determination of major and trace elements present in the cement based composites
(Pergamon-Elsevier Science Ltd, Oxford, 2019)
Adjustment and subsequent validation of energy-dispersive X-ray fluorescence (ED-XRF) method for cement based binders with addition of mineral raw materials (fly ash, zeolite and bentonite) was conducted. Eighteen chemical ...
Chemometric analysis of the influence of mechanical activation on the mica quality parameters
(Elsevier Sci Ltd, Oxford, 2015)
The differences in the set of the process parameters measured before and after mica mechanical activation and their influence on the grain size distribution related characteristics have been studied. The modification of ...
The possibility of obtaining. Composite al18wt%si/sic by compocasting process
(ModTech Publishing House, 2012)
The aim of this study was to investigate the influence of various process parameters on the microstructure of composite materials based on alloys All 8Wt%Si with the addition of 10Wt%SiC. The effect of stirring speed (1000 ...
Leteći pepeo kao neophodna sirovina za održivu proizvodnju građevinskih materijala / Fly ash as important component for sustainability of building materials manufacturing
(Udruženje inženjera građevinarstva, geotehnike, arhitekture i urbanista "Izgradnja", Beograd, 2011)
Nagomilavanje otpada predstavlja jedan od velikih problema moderne civilizacije, kako sa komunalnog tako i sa ekološkog, tehnološkog, urbanističkog, građevinskog i energetskog stanovišta. Raspoloživi podaci o proizvodnji ...
Prediction and fuzzy synthetic optimization of process parameters in heavy clay brick production
(Elsevier Sci Ltd, Oxford, 2013)
Many factors influence final clay brick properties, since the raw materials used are highly heterogeneous. Statistical analysis is rarely used, according to literature, but it would improve understanding of the overall ...