Претраживање
Приказ резултата 1-10 од 21
Assessment of intensive grinding effects on alumina as refractory compound: Acceleration of gamma to alpha phase transformation mechanism
(Elsevier Sci Ltd, Oxford, 2014)
In this study, the feasibility of alumina phase transition enhancement by mechanical activation was conducted. It was showed that the milling environment plays an important role on the physical, chemical and thermal behavior ...
Comparative kinetic study of mechanical activation process of mica and talc for industrial application
(Elsevier Sci Ltd, Oxford, 2014)
Mica and talc have wide areas of application as a raw material in a number of industrial branches. Mechanically activated mica has specific applications such as: capacitors, insulators, and pearlescent pigments. Talc is ...
ANN model of brick properties using LPNORM calculation of minerals content
(Elsevier Sci Ltd, Oxford, 2014)
Mineralogical composition of heavy clays is one of the most important properties when stadying raw materials in brick industry. Within this study, quantitative determination of minerals using LPNORM calculation was performed, ...
Mechanically activated coal ash as refractory bauxite shotcrete microfiller: Thermal interactions mechanism investigation
(Elsevier Sci Ltd, Oxford, 2014)
A growing demand for refractory castables with advanced properties has given rise to a continuous technological evolution and highlighted the necessity for secondary raw materials reapplication even in refractory industry. ...
Drying kinetic simulation of clay tiles made from the raw material having less clay fraction
(Trans Tech Publications Ltd, 2014)
In order to describe the internal moisture rate and to take all different mechanisms of moisture movement into account, it is suitable to use effective diffusivity as a measure of moisture rate, irrespectively of the ...
Analysis of current state and integrity evaluation for the supply tank of generation unit 6 of thermal power plant Nikola Tesla ”A”, Obrenovac
(Trans Tech Publications Ltd, 2014)
Stable supply tank, with volume V = 250 m3 and operating pressure p = 1,5 MPa, of generation unit 6 at thermal power plant 'Nikola Tesla A' in Obrenovac, is designed for water-steam working fluid. It was made of steel Č ...
Methodology for reparation of damaged sleeves and welded shield sections of guide vanes at hydropower plant DJERDAP 1
(Trans Tech Publications Ltd, 2014)
Vertical Kaplan turbines, manufactured in Russia and with nominal power of 200 MW, have been installed in 6 hydroelectric generating units at ’Djerdap 1’. During the refurbishment of hydropower plant experimental non-destructive ...
Prediction and Optimization of Heavy Clay Products Quality
(Wiley Blackwell, 2014)
The effects of chemical composition, firing temperature (800-1100 °C), and several shape formats of laboratory brick samples on the final product quality were investigated. Prediction of the final laboratory products ...
The influence of silica fume and curing regime on some properties of concrete
(Revista Romana de Materiale/ Romanian Journal of Materials, 2014)
The investigation of posibilities of concrete structure modification by silica fume to improve concrete properties was presented in this report. Percentage of silica fume in regard to cement varied between 0% and 20%. ...
Investigation of high temperature behavior and sintering mechanism of fly ash based concretes
(Procema SA, 2014)
Four types of refractory concretes were studied at various temperatures ranging from ambient to adopted maximal 1400 degrees C. The concretes had same matrix composition: K concretes were based on corundum aggregate; B ...