Pretraživanje
Prikaz rezultata 1-10 od 26
Artificial fly ash based aggregates properties influence on lightweight concrete performances
(Elsevier Sci Ltd, Oxford, 2015)
The effect of the application of pelletized fly ash based aggregates obtained through different processing techniques on the behavior of lightweight concretes was analyzed. Experimental program implied production of four ...
Factor space differentiation of brick clays according to mineral content: Prediction of final brick product quality
(Elsevier Science Bv, Amsterdam, 2015)
Chemical composition and XRD qualitative analysis were used to calculate mineral contents of 139 brick clay raw materials using LPNORM. The second order polynomial models (SOP) for all the samples, which express the relation ...
Mathematical approach to application of industrial wastes in clay brick production - Part I: Testing and analysis
(Elsevier Sci Ltd, Oxford, 2015)
The objective of this study was to investigate utilization potential of organic and inorganic industrial wastes in clay bricks. Mineral composition of starting heavy clay sample is tested using an X-ray diffractometer. ...
Mathematical approach to application of industrial wastes in clay brick production-Part II: Optimization
(Elsevier Sci Ltd, Oxford, 2015)
The effects of organic and inorganic waste sludges, coal dust, fly and landfill ashes, soybean crust, sawdust, sunflower flakes and their ash addition to representative heavy clay were investigated. Changes introduced to ...
Analysis of Moisture Transfer During the Drying of Clay Tiles with Particular Reference to an Estimation of the Time-Dependent Effective Diffusivity
(Taylor & Francis Inc, Philadelphia, 2014)
The description of the drying process was reduced to the establishment of a series of theoretical and empirical drying models. The complex processes of simultaneous moisture and heat transfer, which are often nonstationary, ...
What to expect from heavy clay?
(Elsevier Sci Ltd, Oxford, 2013)
The need of testing the quality of brickclay arises in all brick factories, with the opening of new deposits. The analyses are both time and economically consuming, so the aim of this study was to shorten the procedure ...
Characterisation of collapsing loess by seismic dilatometer
(Elsevier, Amsterdam, 2014)
Structural collapse and sudden volume changes represent a major geotechnical issue, particularly in loess soils. There are different criteria for assessing collapse potential based on laboratory test results, which require ...
Novel Utilization of Fly Ash for High-Temperature Mortars: Phase Composition, Microstructure and Performances Correlation
(Wiley, Hoboken, 2015)
In this study, the feasibility of using fly ash to manufacture high-temperature mortars was investigated. The investigation was set to define preliminary characteristics of new types of mortars based on ordinary and/or ...
Assessment of intensive grinding effects on alumina as refractory compound: Acceleration of gamma to alpha phase transformation mechanism
(Elsevier Sci Ltd, Oxford, 2014)
In this study, the feasibility of alumina phase transition enhancement by mechanical activation was conducted. It was showed that the milling environment plays an important role on the physical, chemical and thermal behavior ...
ANN model of brick properties using LPNORM calculation of minerals content
(Elsevier Sci Ltd, Oxford, 2014)
Mineralogical composition of heavy clays is one of the most important properties when stadying raw materials in brick industry. Within this study, quantitative determination of minerals using LPNORM calculation was performed, ...