Pretraživanje
Prikaz rezultata 1-10 od 72
Characterization of drying behavior and modeling of industrial drying process
(IOP Publishing Ltd, Bristol, 2020)
The general method for industrial chamber dryer optimization was reported in this paper. The first step in finding the most suitable drying regime is to characterized the clay raw material, especially its water loss at ...
HSLA Steel - Simulation of Fatigue
(Springer, 2020)
In present paper, based on the results of the experimental study of the behaviour of the samples made of a HSLA steel, in the form of round smooth specimens (RSS) under LCF conditions (with controlled and completely ...
Determination of LCF Plastic and Elastic Strain Components of Steel
(Springer Science and Business Media B.V., 2022)
The behavior of steel in low-cycle fatigue (LCF) is tested experimentally, in accordance with ISO 12106:2017 (E) and/or ASTM E 606-04. For this purpose, smooth specimens which are exposed to low-cycle fatigue at several ...
Failure analysis of ATR 72 tow bar–opportunity for re-design for inspection
(10th EASN Virtual International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens, 2020)
The safe towing of aircraft is an important part in aviation security. Failures during the towing and parking
related operations are not so rare due to bad working circumstance, human error, etc. Tow bars are simple
but ...
The comparative analysis of thermal behaviour of a different thicknesses walls made from autoclaved aerated concrete blocks exposed to fire
(Proceedings of the 19th International Symposium MASE, Ohrid, 2022, 2022)
In this paper a comparative analysis of thermal behavior of six partition walls with different
thicknesses were presented. The walls were dimensions 3000 mm x 3000 mm made from autoclaved
aerated concrete blocks with ...
A Theoretical Model for Vibro-Impact Dynamics of Spur Gears with Tooth Flanks Wear
(Springer Nature, 2020)
The main performance of involute gears operation leads to the appearance of nonlinear dynamic behavior and impact. In this chapter the influence of mild wear of the tooth flanks of gears without machine finishing and surface ...
Diabase from Drača open pit mine in central Serbia - Quality assessment for building stone purposes
(IOP Publishing Ltd, Bristol, 2021)
Vast masses of basic rocks are present as tectonic blocks and slices along the Eastern deep fault of the Vardar zone of Serbia. They are predominantly comprised of gabbro, with smaller part made up of diabase, and occurrences ...
Komparativna analiza ispitivanja požarnootpornih vrata prema srpskim standardima
(Departman za građevinarstvo i geodeziju, Fakultet tehničkih nauka, Novi Sad, 2021)
Prilikom zaštite zgrada od požara neophodno je podeliti objekte na požarne sektore.
Kako ne bi došlo do prenosa vatre iz jednog požarnog sektora u drugi, potrebno je ugraditi
požarnootporna vrata. Sva ugrađena požarnootporna ...
Determination of ventilation heat losses through building envelope – a case study
(University of Banja Luka Faculty of Architecture, Civil Engineering and Geodesy, 2022)
In this paper the experimental procedure for the determination of ventilation heat losses across building envelopes has been shown. The alternative name for this method is Blower Door Test or Fan Pressurization method. ...
Comparative analysis of current standards for testing thermal protection of facade carpentry
(Regional Association for Security and Crisis Management-RASEC S4 GLOSEC Global Security, 2021)
The low level of energy efficiency in buildings results in increased energy
consumption for heating and cooling and high carbon dioxide emissions. Insufficient
thermal protection of the exterior of a building contributes ...